Page 1 of 3 123 LastLast
Results 1 to 10 of 21

Thread: Laser-Wave review Blue 473nm DPSS

  1. #1
    Join Date
    Feb 2005
    Posts
    1,131

    Default Laser-Wave review Blue 473nm DPSS review

    Here you go Bridge laser wave review BLUE LASER

    Good output power! runs nice at 330mw's
    Beam is tem02
    beam exits aperture at 9 degrees on the Y axis!
    Some here say this is normal?? I think not.

    This was presented to me as a "NEW" laser,,
    questionable that is!

    deep incrusted dust on the heat sinks,so if you have a clean system this would have introduced dust to your optics!NOT GOOD!,2 different used bolt patterns on the mounts,,bolt washer impressions
    Also glue globs on the output lens almost in beam path!,
    Heatsink compound was smeared on external areas,again NOT GOOD if you have CLEAN system.

    bare open threads on the output coupler??


    + Good strong Blue output
    Last edited by Lasernerd; 06-06-2009 at 17:30.

  2. #2
    Join Date
    Jan 2007
    Location
    Cupertino, California
    Posts
    2,130

    Default

    How about some detailed pictures?

    Quote Originally Posted by Lasernerd View Post
    Here you go Bridge

    Good output power! runs nice at 330mw's
    Beam is tem02
    beam exits aperture at 9 degrees on the Y axis!
    Some here say this is normal?? I think not.

    This was presented to me as a "NEW" laser,,
    questionable that is!

    deep incrusted dust on the heat sinks,so if you have a clean system this would have introduced dust to your optics!NOT GOOD!,2 different used bolt patterns on the mounts,,bolt washer impressions
    Also glue globs on the output lens almost in beam path!,
    Heatsink compound was smeared on external areas,again NOT GOOD if you have CLEAN system.

    bare open threads on the output coupler??


    + Good strong Blue output
    CLICKY!!!

    Admin: In the immortal words of Captain Planet: YOU HAVE THE POWER
    Admin: (To quit being a bitch)

  3. #3
    Join Date
    Feb 2005
    Posts
    1,131

    Default

    I will later,
    I am busy taking care of my deals,,
    so pictures later,,
    the output is all I care about thanks to 3 axis mounts I can fix the beam angle probs.

    and hey I like FATT beams the tem02 is ok, kinda looks like a figure eight!

  4. #4
    Join Date
    Jan 2007
    Location
    Peking
    Posts
    1,207

    Default

    Hi Lasernerd,
    both of us are not satisfy our trade, why not change back our trade, we send powermeter to you, you send lasers back to us?
    most kindly and reputation people here are advise we trade back, why you not agree? why? why?why?
    we need fact not your own word.
    this is the threads we do a little time ago.
    http://www.photonlexicon.com/forums/...ead.php?t=7573
    Best regards!
    Bridge
    Laser-wave can supply:
    Green 532nm, 4W, 10W, 15W
    blue 445nm, 2W, 3.5W, 6W, 10W
    blue 462nm, 2W
    Red 638nm, 500mW, 1W,2W, 4W, 5W, 6W, 8W, 10W
    All diodes, All optics, All mount, All laser base and housing for yourselves building lasers.
    Speical products, 532nm, OEM-V-SS, 4W, 98mm*46mm*48mm; OEM-H, 10W, 250mm*88mm*70mm
    www.laser-wave.com or www.laser-wave.net
    bridge@laser-wave.com or 463366312@qq.com
    We Chat: 463366312, Laserwave-Bridge

  5. #5
    Join Date
    Jan 2007
    Location
    Cupertino, California
    Posts
    2,130

    Default

    Here is what I think is going on.

    You sent a laser, he likes the laser, so he refuses every attempt to return it you propose.
    CLICKY!!!

    Admin: In the immortal words of Captain Planet: YOU HAVE THE POWER
    Admin: (To quit being a bitch)

  6. #6
    Join Date
    Feb 2005
    Posts
    1,131

    Default

    Quote Originally Posted by Laser Ben View Post
    Here is what I think is going on.

    You sent a laser, he likes the laser, so he refuses every attempt to return it you propose.

    heck ya my laser ROCKS!!!!

    there is a underground exchange going on super hush hush!
    Last edited by Lasernerd; 05-18-2009 at 21:32.

  7. #7
    Join Date
    May 2008
    Location
    nerdtown, USA
    Posts
    1,165

    Default

    Quote Originally Posted by Lasernerd View Post
    heck ya my laser ROCKS!!!!
    This is called "theft", or at the very least, "obtaining by deception".

  8. #8
    Join Date
    Feb 2005
    Posts
    1,131

    Default

    Quote Originally Posted by heroic View Post
    This is called "theft", or at the very least, "obtaining by deception".
    really now

    little slander there kinda like you being a low level tech which is obvious by your nonsense about hardware

    So you are saying the Power head will not check out thru it's perimeters?

    thin ice

  9. #9
    Join Date
    May 2008
    Location
    nerdtown, USA
    Posts
    1,165

    Default

    Quote Originally Posted by Lasernerd View Post
    little slander there kinda like you being a low level tech which is obvious by your nonsense about hardware
    haha really?

    I'd tell you what I do and where I do it, but frankly... I don't want your kind of nastiness in my life. It's clear we've caught you. How about you make things right with Bridge before you sour his opinion of all of us here? He's been nothing but a stand-up guy to everyone on this forum, and you owe him the common decency of undoing the trade he's unhappy with.

    Slander? okay dude. you just keep telling yourself that. Showing someone a picture of something, and then selling them something materially worse, is "obtaining by deception". That's not slander, that's how the law on the sale of goods works.

  10. #10
    Join Date
    Nov 2008
    Location
    South West Florida
    Posts
    232

    Default

    Mark / LASERNERD,

    You have indicated to me that you would help me out with any problem that I had with the meeter even as recently as yesterday so why not do the same thing with Bridge.

    I see that he is willing to use a middle man and even to pay for shipping so why not just make the swap and move on. You even indicated to me that you could sell these meter on ebay for more money so why not get it back sell it on ebay for more money in working condition and then purchase a new blue from whatever provider you decide.

    Then Bridge would be happy and you could still get a blue from a vendor that meets your quality requirements. It would also help bring a little goodwill back to you.

    Please let me know it I can help out with the process.

    LJ

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •