Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: good afternoon

  1. #1
    Join Date
    Jul 2006
    Location
    Connecticut, USA
    Posts
    2,478

    Default good afternoon

    i suggest we play with some lasers today.

    -Marc
    http://www.laserist.org/images/ildalogos/ILDA-logo_colored-beams_Corporate_150w.jpg

    ILDA- U.S. Laser Regulatory Committee

    Authorized Dealer for:

    • Pangolin Laser Software and Hardware
    • KVANT Laser Modules & Laser Systems
    • X-Laser USA
    • CNI Lasers
    • Cambridge Technology & Eye Magic Professional Scanning Systems

    FDA/CDRH Certified Professional LuminanceRGB Laser Light Show Systems


  2. #2
    Join Date
    Aug 2008
    Location
    the hills
    Posts
    976

    Default

    OK.

    I'll start this off, now we are getting a little more back to where we ourta be

    I made this the other day. Modified one of laserman532 mounts (No pat, this isn't the one we were talking about), 2 LOC red, PBS from CTLasres, a flex driver, scrap of alu plate, and a little time.
    Attached Thumbnails Attached Thumbnails pic1.jpg  

    pic2.jpg  


  3. #3
    Join Date
    Jul 2008
    Location
    Maryland
    Posts
    1,638

    Default

    ME LIKES ! ! ! ! !
    great job and great idea..
    now some beam shots please
    Quis custodiet ipsos custodies?
    Solid State Builders Group

  4. #4
    Join Date
    Jul 2006
    Location
    Connecticut, USA
    Posts
    2,478

    Default

    doug-

    that looks GREAT! wheres our beam shot though??
    http://www.laserist.org/images/ildalogos/ILDA-logo_colored-beams_Corporate_150w.jpg

    ILDA- U.S. Laser Regulatory Committee

    Authorized Dealer for:

    • Pangolin Laser Software and Hardware
    • KVANT Laser Modules & Laser Systems
    • X-Laser USA
    • CNI Lasers
    • Cambridge Technology & Eye Magic Professional Scanning Systems

    FDA/CDRH Certified Professional LuminanceRGB Laser Light Show Systems


  5. #5
    Join Date
    May 2006
    Location
    Native Floridian
    Posts
    3,092

    Default

    Very nice and compact, looks great!

  6. #6
    Join Date
    Aug 2008
    Location
    the hills
    Posts
    976

    Default

    OK.

    Give me a few and i'll see what i can do.

  7. #7
    Join Date
    Jun 2007
    Location
    Lake Geneva, WI.
    Posts
    2,704

    Default

    Very Nice! You may want to consider putting some type of heatsink on that transistor. Especially since you're going to be drawing around 600mA.

  8. #8
    Join Date
    Nov 2007
    Location
    Bend Oregon USA
    Posts
    3,348

    Default

    its looking good mang!
    Pat B on alt.lasers


    Visit My Site

    laserman532 on ebay
    laserman532 on LPF

    Been there, done that, got the t-shirt & selling it in a garage sale.

  9. #9
    Join Date
    Jul 2008
    Location
    Maryland
    Posts
    1,638

    Default

    bump ... BEAMSHOTS
    Quis custodiet ipsos custodies?
    Solid State Builders Group

  10. #10
    Join Date
    Aug 2008
    Location
    the hills
    Posts
    976

    Default

    Quote Originally Posted by 300EVIL View Post
    You may want to consider putting some type of heatsink on that transistor. Especially since you're going to be drawing around 600mA.

    Thanks all y'all.

    It's not done yet. I agree it Will need a heatsink. I have a few ideas, would really like to make it even smaller. This is just in the meantime to do something rather than nothing.

    I showed LM532 a pic early on of something i was thinking. I think it will still work with some small changes....


    I dunno.

    Doing is learning.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •