Results 1 to 4 of 4

Thread: Coherent LPM 200 from Lasernerd

  1. #1
    Join Date
    Feb 2007
    Location
    Delaware USA
    Posts
    794

    Thumbs up Coherent LPM 200 from Lasernerd

    Over the weekend I recieved my LPM from Lasernerd and I have to say
    that I'm very pleased with it. I tested it out against my Coherent Laser Check wand and also a Coherent Fieldmaster meter I also just purchased
    from another source. I used a 170mW Maxy Module 658nM laser for the test.
    Basically, there was maybe say 1 to 2 mW difference between the readings of all three meters. The powerhead was in very good shape except for the glue residue from the tape Mark used to cover the sensor hole for shipping. There's no scratches on the sensor, just a small mark from another laser near the very top. This will not effect the readings from the center of the sensor pad. Here's some pictures from
    the dungeon.

    Mark / ImageLight
    Attached Thumbnails Attached Thumbnails LPM 200 003.jpg  

    LPM 200 002.jpg  

    LPM 200 001.jpg  


  2. #2
    Join Date
    Feb 2005
    Posts
    1,131

    Default

    Thank you sir,
    if any issues occur later down the road I will take care of it 100%

    and your analog scale FieldMaster those are cool

    wow enjoy your new toys!

    crap I did not think the tape would leave its adhesive,, Sorry about that,,they must be getting real warm in transit!
    Last edited by Lasernerd; 05-20-2009 at 07:23.

  3. #3
    Join Date
    Jan 2008
    Location
    Belgium
    Posts
    1,009

    Default

    Since you have a fieldmaster now, you won't need the lpm 200 anymore correct?

  4. #4
    Join Date
    Feb 2005
    Posts
    1,131

    Lightbulb

    Awesome,
    i was thinking of donating a Coherent FieldMax top with a PM300 To the large area LEM's for the
    laser shop use?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •