Page 1 of 2 12 LastLast
Results 1 to 10 of 19

Thread: Cooling Idea

  1. #1
    Join Date
    Jun 2007
    Posts
    24

    Default Cooling Idea

    for those people that are running watercooled lasers..

    has anyone tried swoping the water for 70% food grade Propylene glycol 30% de-ionised water

    it has better thermal properties than just water alone .. and it drops the freezing point of water to something like -20*C

    alan
    Last edited by tigerpaws; 05-30-2009 at 10:31.

  2. #2
    Join Date
    Mar 2008
    Location
    Canton, GA USA
    Posts
    384

    Default

    I used to use 100% ethylene glycol to cool my CO2 laser. One end of the tube was at high voltage and had the cooling liquid on it too. Made a good insulator.

  3. #3
    Join Date
    May 2008
    Location
    Wisconsin
    Posts
    449

    Default

    Quote Originally Posted by tigerpaws View Post
    ... it drops the freezing point of water to something like -20*C
    You know your chiller is too big if you need that kind of protection

  4. #4
    mixedgas's Avatar
    mixedgas is offline Creaky Old Award Winning Bastard Technologist
    Infinitus Excellentia Ion Laser Dominatus
    Join Date
    May 2007
    Location
    A lab with some dripping water on the floor.
    Posts
    10,016

    Default

    Quote Originally Posted by tigerpaws View Post
    for those people that are running watercooled lasers..

    has anyone tried swoping the water for 70% food grade Propylene glycol 30% de-ionised water

    it has better thermal properties than just water alone .. and it drops the freezing point of water to something like -20*C

    alan

    Done in medical lasers, watch out for bacteria and corrosin with some materials.

    Steve
    Qui habet Christos, habet Vitam!
    I should have rented the space under my name for advertising.
    When I still could have...

  5. #5
    Join Date
    Jul 2008
    Location
    Marysville, WA
    Posts
    855

    Default

    I'm rather wasteful and don't bother to re-circ my water. I would need a huge chiller to be able to do so, so I just make one pass and then down the drain. No need for fancy water!

    However, I do have a small co2 laser on the way so I might use some fancy water for that setup.


  6. #6
    Join Date
    Jun 2007
    Posts
    24

    Default

    i was just wondering. I seems like a lot of people just use water when from an efficiency point of view it would make sense to use a cooling medium. Considering the costs of high power lasers

  7. #7
    Join Date
    Jul 2008
    Location
    Miami
    Posts
    506

    Default coooling

    I would use a big block radiator .
    " MANUFACTURER OF HIGH QUALITY MICRO LASER COMPONENTS" !!
    http://www.microlaserlabs.com/

  8. #8
    Join Date
    Dec 2008
    Location
    Southport, UK
    Posts
    2,746

    Default

    When I used to be involved with motorsports we used a product called "Water Wetter" to improve the connection between the coolant and the cooling system. It did have a noticable effect.

    http://www.redlineoil-europe.com/coolants/product.asp?product=WaterWetter%AE_00027
    http://img62.imageshack.us/img62/3985/laser.gif

    Doc's website

    The Health and Safety Act 1971

    Recklessly interfering with Darwin’s natural selection process, thereby extending the life cycle of dim-witted ignorami; thus perpetuating and magnifying the danger to us all, by enabling them to breed and walk amongst us, our children and loved ones.





  9. #9
    Join Date
    May 2008
    Location
    Wisconsin
    Posts
    449

    Default

    I think tap water averages 0.2˘/gal. You'd probably end up spending more trying to run a chiller.

  10. #10
    Join Date
    May 2007
    Location
    Orlando, FL
    Posts
    1,090

    Default

    I thought it isn't so much the cost as much as it is the dirt and minerals in tap water... hence the deionized H2O...

    --DDL
    I suffer from the Dunning–Kruger effect... daily.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •