nd:YAG 1064nm cutting laserhead, searching for info

[Henry.]

Well on mine it absolutely are since the head and a focus lens is right after, guess its the same on weartronics.

weartronics: i have now read through your thread and there some interesting info for sure, especially about the PSU. It seems like you dont know the output from the laser, dont know if this could help but mine are 180W CW and if i recollect right so is the lamp 32A or 35A 219V. Cant find the box for it though.

Here some other pictures if any is interested. Might open the rest up later cant find the right screwdriver right now.

[Henry.]

Actually got the manual from Scanlab for this scanner head and in the pdf so did it mention that the head uses the XY2-100 protocol which i have never heard about but it seems to be a quite simple one so i finally got the info needed to be able to steer it! Now i only hope that the head isnt locked or coded in any way so it needs special keys or anything to unlock it or so but i hope it dont.

The original program for this that i have however seems to need a special kind of decoding device between the head and computer to be able to stear the scanner wich i dont have, and that is disturbing as hell.

[Junktronix]

I just got a couple of Rofin Sinar marking systems that have Scanlan SK-1010 galvos inside. Any chance I can get a copy of this manual?

[Henry]

Sure could, you got PM.