Mobolazer GScan

[mikkojay]

I bought this on ebay a while back, it was advertised as non-working.
I purchased it mainly for the 532 that was included. When I got it, one axis was definitely not working. I metered the cables and did a few tests on the board, but everything looked good to me. I then used compressed air to blow out the sensors on the galvos, and the second axis came back to life. There are a few adjustment pots in there that I am sure could stand to be tweaked. Now that it is working, it has just sat in a box for over a year.
It works, but it is definitely in used/as-is condition. I don't have a manual for it, but after playing with it, it seems like it would be OK for a beam table as an added source of beam effects.
I don't know what it is worth, if anything- so if anyone already has one of these and would like another to use as a spare, or someone wants to experiment with it to make some beam effects, etc. I would part with it for???
This is for the GScan, and controller box & pad, not the 532 (that's now happily mounted in my RGB)
Thanks, Mike

[thesk8nmidget]

how much are you looking to sell it for?

[mikkojay]

You know, I suppose I was just fishing for trades-
How about this- I'll do it bid style and start it at $20 plus shipping.
If nobody wants it after a week or so, I'll just keep it.
If a few people are interested I will let them bump it up for a week from the time of this post.
Would that work?
-Mike

[Laser Ben]

I'll offer $40 for it

[cruch]

My offer $50 for this gadget...

[clandestiny]

60.00 for the gadget

[Laser Ben]

$70 for it! .

[clandestiny]

Knock it off Benny-

Go play with your z fold laser cavity

80.00

[Laser Ben]

Well, unfortunately, the controller board does not come until tomorrow

$90

[clandestiny]

LOL Very Good-


94.99