He'd need a quartz worker with hydrogen tooling. Brian does have the academic experience to do it. While no doubt in my mind Brian and his staff at Cambridge could do it, the question is, would Brian have a ultra high vacuum station that he is willing to mess up with bromine crud, and I doubt that. Bromine with its high vapor pressure is like mercury, once its in your hivac station its persistent and will not go away. Running bromine just rendered that station useless for ion lasers without a complete rebuild.
Can the disk be shaken gently back into place? Depending on the tube's prior processing and where the bromine crud is, it might be possible to "tack" the disk back into place without splitting the tube, by melting the quartz on either side of the disk and tooling it. Did Spektronika fuse the disks or just slide them in and hold them in place by distorting the tube?
Quartz doesn't "flow" like molten glass, it has to be "tooled" into place, and if its dirty when worked, it can crack or not fuse where the dirt is sealed between the two pieces of quartz. CuBr may qualify as dirt.
But odds are its cheaper for it to go back to Spektronika where they are already set up for it.
Steve
Last edited by mixedgas; 06-22-2009 at 06:27.
Qui habet Christos, habet Vitam!
I should have rented the space under my name for advertising.
When I still could have...