Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 24

Thread: Hi

  1. #11
    Join Date
    Jul 2008
    Location
    Marysville, WA
    Posts
    855

    Default

    60W is a lot, but 10.6um is considered an 'eye safe' wavelengh. This means that the light cannot reach your retina, as your cornea will block the light from entering your eye. So, while a co2 laser won't ruin your retina, it can burn the surface if your eye if you catch a stray beam.

    As far as I know, a regular pair of acrylic safety glasses are perfect co2 laser protection, just in case you bounce a beam off something.

  2. #12
    Join Date
    Jun 2009
    Posts
    4

    Default

    Hello

    I have standard clear acrylic goggles and a beam stop i made so i should be OK

    thanks for the replies
    Last edited by daylight; 06-29-2009 at 09:26.

  3. #13
    Join Date
    Jul 2007
    Location
    Knoxville, TN, USA
    Posts
    3,154

    Default

    Quote Originally Posted by daylight View Post
    Hello

    I have standard clear acrylic goggles and a beam stop i made so i should be OK

    thanks for the replies
    So, I've never dealt with anything stronger than a 1 watt 532 DPSS, and maybe I'm way off here, but -

    "clear acrylic goggles and a beam stop" doesn't sound like a lot of safety equipment to have on hand while using a 60 watt laser...
    RR

    Metrologic HeNe 3.3mw Modulated laser, 2 Radio Shack motors, and a broken mirror.
    1979.
    Sweet.....

  4. #14
    Join Date
    Jul 2008
    Location
    Miami
    Posts
    506

    Default

    Quote Originally Posted by Stuka View Post
    So, I've never dealt with anything stronger than a 1 watt 532 DPSS, and maybe I'm way off here, but -

    "clear acrylic goggles and a beam stop" doesn't sound like a lot of safety equipment to have on hand while using a 60 watt laser...

    See thats what Im trying to get across to Daylight. It dosent matter if you sit behind a brick wall and burn shit. Starting off small and working your way up to bigger lasers is the way to go. I started off with a 7mw hene glass tube and power supply 18 years ago, I was 16 and the lessons you learn like " HIGH VOLTAGE'' AND GETTING WACKED IN THE EYE BY A 7 MW AT 3 FEET AWAY IS BETTER OFF THAN GETTING 40,000 VOLTS SHOCK AND 60,000 MW'S BLAST!!!! YOU SEE WHAT IM TRYING TO SAY HERE DAYLIGHT? BUT ITS A FREE COUNTRY AND YOUR WELCOME TO DO WHAT EVER YOU WANT. Im done here !
    Last edited by Laser Zone; 06-29-2009 at 18:50.
    " MANUFACTURER OF HIGH QUALITY MICRO LASER COMPONENTS" !!
    http://www.microlaserlabs.com/

  5. #15
    Join Date
    Nov 2007
    Location
    Bend Oregon USA
    Posts
    3,350

    Default

    all engraving machines just have a piece of acrylic to enclose the beam area. that is all you need. It will block all "scattered" light but it will NOT stop a direct beam at 60 watts.
    Pat B

    laserman532 on ebay

    Been there, done that, got the t-shirt & selling it in a garage sale.

  6. #16
    Join Date
    Jul 2006
    Location
    Connecticut, USA
    Posts
    2,478

    Default

    hey daylight-

    i think you just may have "rubbed us wrong" here a little bit. most of us here REALLY try to stress the safety aspect of lasers and the RESPONSIBLE use of Lasers. you seemed to jump in as a relatively new guy boasting about "burning crap."

    that kind of talk doesnt go over too well here. of course we all have had our fun with lasers and buring stuff. but it is REALLY REALLY tried to be stressed here the responsible use and SAFE use of ALL lasers. a 60W CO2 laser will, pardon my language, FUCK YOU UP (or anyone else around you) faster than you have a chance to say, OUCH...that hurts.

    i am quite sure you arent an idiot and i am sure you arent going to do anything stupid. But some of us here get REALLY bent out of shape when we see first time posts like what you put.

    I have built MANY lasers. i have lasers from 1mW up to 5 Watts. i have had my hands on 20W of KTP and built a 2 watt argon system. I am BY NO MEANS a "Pro" with lasers, but i definitely consider myself to be somewhat experienced. I honestly dont think i would EVER feel comfortable with my own CO2 laser without some SERIOUS training and education first.

    CO2 acts MUCH differently than visible wavlengths. as in (and someone correct me if im wrong) it can and will melt regular lens' glass or mirrors. the radiation is absorbed differently than say a 532nm laser. so, you tuen your CO2 on...go to put a mirror in front of it to beam steer and boom...you got a melting mirror in your hands.

    i think what we ALL are trying to say here, is be VERY careful and if i were you, educate yourself on PROPER lasing of that system. remembr, you cant see what youre shooting. a mistake is found when its too late!!!

    i am sure some guys here (i think laserxone above) said he has/had some CO2 systems. i would STRONGLY urge you to start researching and educating yourself on what you just purchased. becasue simply getting it, turning it on and "burning crap" is NOT a good idea!!!

    -Marc
    http://www.laserist.org/images/ildalogos/ILDA-logo_colored-beams_Corporate_150w.jpg

    ILDA- U.S. Laser Regulatory Committee

    Authorized Dealer for:

    • Pangolin Laser Software and Hardware
    • KVANT Laser Modules & Laser Systems
    • X-Laser USA
    • CNI Lasers
    • Cambridge Technology & Eye Magic Professional Scanning Systems

    FDA/CDRH Certified Professional LuminanceRGB Laser Light Show Systems


  7. #17
    Join Date
    Jul 2008
    Location
    Miami
    Posts
    506

    Default

    Daylight I want you to do this,, put you hand in front of that beam and take it like a man. Then you will have a new respect for High power laser at the speed of light !!
    " MANUFACTURER OF HIGH QUALITY MICRO LASER COMPONENTS" !!
    http://www.microlaserlabs.com/

  8. #18
    Join Date
    Jul 2008
    Location
    Miami
    Posts
    506

    Default

    Daylight Im sure you a good kid and I liked your response that you want to have the tube and supply enclosed and all the other laser saftey stuff in place. Where are you at ? If you give your state and location Im sure there some old timer that can give you knowledge on your system. If you need any help and want to be stupefied by knowledge that you couldnt imagine existed with lasers ,Dean at Nitelite lasers can help you out and of course the pro's here at Photon !! Big power lasers have got so cheep that kids are getting themselves .50 cal rifles instead of bebe guns !! Ask for help and yes post your pics !! BUT DONT YOU DARE FUCKING GO ON THIS SHIT ALONE !!! LOL
    " MANUFACTURER OF HIGH QUALITY MICRO LASER COMPONENTS" !!
    http://www.microlaserlabs.com/

  9. #19
    Join Date
    Nov 2007
    Location
    Bend Oregon USA
    Posts
    3,350

    Default

    Quote Originally Posted by Laser Zone View Post
    Daylight I want you to do this,, put you hand in front of that beam and take it like a man. Then you will have a new respect for High power laser at the speed of light !!
    Or you could have him light a joint in his mount like your buddy did with a supposedly 40 watt ktp laser with children in the room...that was pretty dumb sorry I couldnt resist, Ive seen a bucket load of dip shit flow from your laser operational skilz.
    Pat B

    laserman532 on ebay

    Been there, done that, got the t-shirt & selling it in a garage sale.

  10. #20
    Join Date
    Jul 2008
    Location
    Miami
    Posts
    506

    Default

    [QUOTE=Laserman532;104938]Or you could have him light a joint in his mount like your buddy did with a supposedly 40 watt ktp laser with children in the room...that was pretty dumb sorry I couldnt resist, Ive seen a bucket load of dip shit flow from your laser operational skilz.


    Pat I think your a little confused . This is not my vid, http://www.youtube.com/watch?v=t65_JJrLFZ8
    " MANUFACTURER OF HIGH QUALITY MICRO LASER COMPONENTS" !!
    http://www.microlaserlabs.com/

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •