Results 1 to 10 of 10

Thread: 400mw green lumina wheel

  1. #1
    Join Date
    Aug 2008
    Location
    Michigan-USA
    Posts
    132

    Laser Warning 400mw green lumia wheel

    Hi fellow addicts:

    Here is my first attempt at a lumia wheel. It uses a 400mw 532nm labby. The motor runs from 1/2 RPM down to 1/10th RPM and is adjustable by a pot. The plane it sits on is adjustable from zero degrees to 45 degrees. I have a magnet on the end of the shaft to facilitate fast changes of the various wheels. Each glass wheel has a magnet on it also. I have 5 precut circular glass wheels and 50 other glass samples that I can attach to the motor.

    Here are a few photos of the setup and a video of it in operation. I call it my Magnalum 400

    Will bring it to SELEM.


    http://img25.imageshack.us/gal.php?g=l1090297.jpg

    http://www.youtube.com/watch?v=b3yfdKVC2sg

    Edit; changed to lumia and changed youtube video


    John
    Last edited by Docjohn; 06-28-2009 at 20:42.
    Inventor of the hemorroid transplant

  2. #2
    Join Date
    Mar 2007
    Location
    Rotorua New Zealand
    Posts
    528

    Default

    Hey John,

    Look really neat..

    Love the magnet idea I have been wondering how to do something like this.

    Thanks for sharing.

    By the way do you fire the beam at the "bubbly" side or the "smooth" side of the glass.
    Bit hard to tell from the pix.

    Cheers

    Ray
    NZ

  3. #3
    Join Date
    Mar 2008
    Location
    Canton, GA USA
    Posts
    384

    Default

    Hi All,

    This is a very kind and soft-spoken post...

    I've always heard that this effect is called "lumia" instead of "lumina", which is a car...

    I'm juss sayin'...

    Tim

  4. #4
    Join Date
    Aug 2008
    Location
    Michigan-USA
    Posts
    132

    Default

    Quote Originally Posted by Pitts View Post
    Hey John,

    Look really neat..

    Love the magnet idea I have been wondering how to do something like this.

    Thanks for sharing.

    By the way do you fire the beam at the "bubbly" side or the "smooth" side of the glass.
    Bit hard to tell from the pix.

    Cheers

    Ray
    NZ


    I fire the laser at the smooth side of the glass. The magnets are on the smooth side also. The real trick was to get the magnet on the end of the shaft. I will post a picture of how I did it soon.

    John
    Inventor of the hemorroid transplant

  5. #5
    Join Date
    Aug 2008
    Location
    Michigan-USA
    Posts
    132

    Default

    Quote Originally Posted by trwalters001 View Post
    Hi All,

    This is a very kind and soft-spoken post...

    I've always heard that this effect is called "lumia" instead of "lumina", which is a car...

    I'm juss sayin'...

    Tim
    Boy, you got me. Maybe someone will comment further.

    Edit: Corrected in initial post

    John
    Last edited by Docjohn; 06-27-2009 at 18:43.
    Inventor of the hemorroid transplant

  6. #6
    Join Date
    Aug 2008
    Location
    Michigan-USA
    Posts
    132

    Laser Warning how attach magnet to end of shaft

    I got 4-40 nylon nuts from ACE hardware. With a little force you can push the nylon nut onto the end of the shaft. I then used J-B weld to attach the magnet and the nut to the end of the shaft. Then J-B weld is used to attach another magnet to the glass piece. Once the J-B weld sets up over night then it is a simple matter of putting the 2 magnets together. You have to observe the polarity of the magnets or they will repell each other. I got the magnets from ACE hardware. They came 8 to a package for $2. I got the 50 glass samples for $30 as suggested by Mophead. I got the round glass cutouts from Greg ( Displaser) It is real nice to change the glass in a couple seconds and get a new pattern.

    John
    Attached Images Attached Images
    Last edited by Docjohn; 06-27-2009 at 19:03.
    Inventor of the hemorroid transplant

  7. #7
    Join Date
    Aug 2008
    Location
    the hills
    Posts
    983

    Default

    Nice job, John.

    I never even thought of magnets, brilliant. saves drilling many holes in the glass. I do think if it were for a show type thing, up on a truss or something, they may need to be more secure.

    And yeah, i spelled it Lumina® too.......



    As a side note...... Does anyone know.... Is there any way to AR coat glass at home? It would help things alot.

  8. #8
    Join Date
    Aug 2008
    Location
    Michigan-USA
    Posts
    132

    Default

    I never even thought of magnets, brilliant. saves drilling many holes in the glass. I do think if it were for a show type thing, up on a truss or something, they may need to be more secure.

    And yeah, i spelled it Lumina® too.......
    Hi Doug:

    I tried 8 different ways of trying to hold the motor shaft to the glass. All the way from gromets to a bushing with set screws (those wouldn't come off ) The magnet idea I choose because it allowed me to use all the glass samples you found.

    John
    Inventor of the hemorroid transplant

  9. #9
    Join Date
    Sep 2007
    Location
    Omaha, NE
    Posts
    769

    Default

    Looks great! it looks like you scored some nice glass there.
    I had some good success with these for quick disconnect wheels:

    Keep up the cool vids
    -Mike


  10. #10
    Join Date
    Jan 2006
    Location
    Charleston, SC
    Posts
    2,147,489,632

    Thumbs up

    That looks really good, John! And the idea of using magnets for quick-change wheels is brilliant!

    Adam

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •