Page 3 of 3 FirstFirst 123
Results 21 to 24 of 24

Thread: Hi

  1. #21
    Join Date
    Jan 2006
    Location
    Charleston, SC
    Posts
    2,147,489,632

    Exclamation 10,600 nm is only eye-safe at very low power levels!

    Quote Originally Posted by GooeyGus View Post
    60W is a lot, but 10.6um is considered an 'eye safe' wavelengh. This means that the light cannot reach your retina, as your cornea will block the light from entering your eye. So, while a co2 laser won't ruin your retina, it can burn the surface if your eye if you catch a stray beam.
    Yes, the human cornea is opaque to 10,600 nm light, so in theory it will never reach the retina. However, this really isn't relevant when you're talking about 60 watts of power. It won't merely "burn the surface" of his cornea... It will destroy it almost instantly, and continue to burn straight through the remaining structures of the eye. At this power level there is no "eye safe" wavelength until you get well below the microwave bands.

    Even 1/4 inch acrylic (which is also opaque to 10,600 nm) can't hold up to the raw beam for more than a few seconds. 60 watts is a LOT of power...

    Adam

  2. #22
    Join Date
    Nov 2007
    Location
    Bend Oregon USA
    Posts
    3,350

    Default

    [QUOTE=Laser Zone;104990]
    Quote Originally Posted by Laserman532 View Post
    Or you could have him light a joint in his mount like your buddy did with a supposedly 40 watt ktp laser with children in the room...that was pretty dumb sorry I couldnt resist, Ive seen a bucket load of dip shit flow from your laser operational skilz.


    Pat I think your a little confused . This is not my vid, http://www.youtube.com/watch?v=t65_JJrLFZ8
    well it used to be normello - if it was not you, then who was it?...profusely apologize.

    whoever it was needs to be bitch slapped about the head and shoulders.
    Pat B

    laserman532 on ebay

    Been there, done that, got the t-shirt & selling it in a garage sale.

  3. #23
    Join Date
    Nov 2007
    Location
    Bend Oregon USA
    Posts
    3,350

    Default

    Quote Originally Posted by buffo View Post
    Yes, the human cornea is opaque to 10,600 nm light, so in theory it will never reach the retina. However, this really isn't relevant when you're talking about 60 watts of power. It won't merely "burn the surface" of his cornea... It will destroy it almost instantly, and continue to burn straight through the remaining structures of the eye. At this power level there is no "eye safe" wavelength until you get well below the microwave bands.

    Even 1/4 inch acrylic (which is also opaque to 10,600 nm) can't hold up to the raw beam for more than a few seconds. 60 watts is a LOT of power...

    Adam
    my cutting lasers will cut 1/4" acrylic when focused, when unfocused it will bubble and melt and distort it. Im not saying it is safe by any means...I am saying ALL lasers are dangerous in the wrong hands...too many examples to list. If you dont know what you are doing, hang it on the wall as art.
    Pat B

    laserman532 on ebay

    Been there, done that, got the t-shirt & selling it in a garage sale.

  4. #24
    Join Date
    Jul 2008
    Location
    Marysville, WA
    Posts
    855

    Default

    Quote Originally Posted by buffo View Post
    Yes, the human cornea is opaque to 10,600 nm light, so in theory it will never reach the retina. However, this really isn't relevant when you're talking about 60 watts of power. It won't merely "burn the surface" of his cornea... It will destroy it almost instantly, and continue to burn straight through the remaining structures of the eye. At this power level there is no "eye safe" wavelength until you get well below the microwave bands.

    Even 1/4 inch acrylic (which is also opaque to 10,600 nm) can't hold up to the raw beam for more than a few seconds. 60 watts is a LOT of power...

    Adam
    I agree 100%

    I guess I should have specified, I was talking about scattered light. If he catches a beam in the eye... well... maybe he will get a gig somewhere as a pirate

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •