This is what i can do.
Send both of the following down to you, free of charge. 
Try them both, and keep the one that works best.
If you want to keep one or both, we'll work out a price or maybe you have something else for trade.
For the AOMs
AA-Opto-Electronic MTS110-A3-VIS
Material-Acoustic mode TeO2 [S]
Acoustic Velocity Nom V=650 m/s
Optical Wavelength range 488-635 nm
Transmission > 95 %, nom 98 %
Optical Input / Output polarizations Linear / Not specified
Aperture 3 x 3 mm²
Carrier frequency / Frequency shift 110 MHz
Separation angle 90 mrd @532 nm
Diffraction efficiency (with TEM00 beam, M² £ 1.1) > 85 %, nom 90 %
Rise time 1 μs /mm (min 0.3 μs)
Amplitude modulation bandwidth > 400 KHz (-3 dB, @ 1 mm)
Static extinction ratio > 2000/1
Max optical power density 5 W / mm²
Input impedance Nom 50 W
V.S.W.R. Nom < 1.5/1
RF Power < 1 Watt, nom 100 mW
Connector SMA
Size / Weight (Lxlxh) 50.9 x 22.4 x 15.8 mm3 / 50 g
Operating Temperature 10 to 40 °C
ISOMET 1205C-2
Spectral Range: .442-> 1.5mm*
Standard Operating Wavelengths: 442-488nm, 488-633nm, 633-830nm
Interaction Medium: Lead Molybdate (PbMo04)
Acoustic Velocity: 3.63mm/ms
Active Aperture: 1mm and 2mm (see below)
Centre Frequency (CF): 80MHz
RF Bandwidth: 30MHz
Input Impedance: 50W Nominal
VSWR: <1.5:1 @ 80MHz
DC Contrast Ratio: >1000:1 min (>2000:1 typical)
PERFORMANCE vs. WAVELENGTH
Wavelength (nm): 442 488 515 633 830*
RF Drive Power, 1205C-2 (W): <0.4 <0.5 <0.6 <1.0 <1.5
Bragg angle (mrad): 4.9 5.4 5.7 7.0 9.1
Beam Separation (mrad): 9.7 10.7 11.3 13.9 18.3
Static Insertion Loss (%) : <10 <5 <3 <3 <3
PERFORMANCE vs. BEAM DIAMETER
Beam Diameter (mm): 2.0 1.0 0.34 0.2 0.14
Rise Time (ns): 360 180 60 35 25
Modulation Bandwidth (MHz) @ MTF = 0.5: 1.0 1.9 5.8 10 15
Deflection Efficiency (% @ CF): 90 85 85 80 75
Both come with matching drivers and all the cables.