Results 1 to 2 of 2

Thread: 1998 general scanning hm1400 laser problem

  1. #1
    Join Date
    Jul 2009
    Posts
    2

    Default 1998 general scanning hm1400 laser problem

    Hello everyone
    i am very new to this site. I have a general scanning yag that won't load the start up codes on boot up. which gives a pass 2 time out error. Can any one tell me what is wrong. It has the H/C helper card. I'm not sure if that is bad. this happens during the MCL_init file.


    thanks for your help
    Damien

  2. #2
    Join Date
    Jul 2009
    Posts
    2

    Default i fixed it.

    Yes I fixed. It turned out to be a bad Mother Board. I dropped the card and the hard drive in and old computer waiting to be scrapped and the darn thing is working fine.

    Thanks

    Damien

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •