The laser head originally had a C mount 650nm diode on a copper block. It was DOA...well it made 40 or so mw. I just machined an aluminum block to accept the two 642 diodes and went from there....using the original TEC chip. I like to use ribon cable and just sealed off the hole where the old cable went through the housing. You could get 4 diodes installed into a housing of this size. Maybe they will burn in and start making a little more power...only 4 hours of use so far. About .050" was machined off the glass lens collimators to get "in range". I still think a better optics set is out there....somewhere. These are much better than the plastic units.....thanks Mo.....for the collimators.
You are the only one that can make your dreams come true....and the only one that can stop them...A.M. Dietrich