Hey thanks for the info on the Distro, I pull about 24 amps at full current single phase. I always take all of the cable out of the case when run it. I ran across "issues" the first time I ran itlots of heat!
Anyhow THANKS!
Senior Member
Hey thanks for the info on the Distro, I pull about 24 amps at full current single phase. I always take all of the cable out of the case when run it. I ran across "issues" the first time I ran it
Anyhow THANKS!
Home brew, full color RGB projector, In my garage!
http://mycoolspot.com/lpics2/Table1.JPG
http://mycoolspot.com/lpics4/after1.jpg
http://mycoolspot.com/lpics4/after2.jpg
Senior Member
yeah, that's from the inductance. if you figure 8 your cable, that'll cancel out and you won't have issues. a small figure 8 infront of your cable box will look nice and will keep the casters in place so it doesn't run around on you.
Also, pulling the cable out every time you use it is good practice anyway, it makes it easier to notice damage (should there be any).
"TO DO IS TO BE" - Nietzsche
"TO BE IS TO DO" - Kant
"DO BE DO BE DO" - Sinatra
Junior Member
Almost finish Guys!
hi guys im almost done with my project it took me a long time to adjust the diodes but its finally done. need to go buy more fans and fan grills. but im not that satisfied its still not giving me a solid white... what do you guys suggest i do, should i get a stronger blue like a 150mW 473nm?
Dont make fun i know is I-Show! IM A NOOB...
300mW 650nm Red
150mW 532nm Green
80mW 473nm Blue
Junior Member
This is my DIY laser projector. Galvos Laserworld LW-50, laser 150mw 532nm, sound card DAC.
Senior Member
Originally Posted by sopkis
This is my DIY laser projector. Galvos Laserworld LW-50, laser 150mw 532nm, sound card DAC.
That's a cute little projector.
Doc's website
The Health and Safety Act 1971
Recklessly interfering with Darwin’s natural selection process, thereby extending the life cycle of dim-witted ignorami; thus perpetuating and magnifying the danger to us all, by enabling them to breed and walk amongst us, our children and loved ones.
Senior Member
What's with the SLA batteries?
Is it portable? What did you use for an inverter?
Bridge, I absolutely LOVE that plexiglass case, I want one!
Junior Member
Yes, this scanner is portable, it can run from batteries, or from 220v. When it run from 220v, it charge the batteries. The power stage is - 2x 12V 7Ah SLA batteries, Titan 75W power inverter (12V to 220V), battery charging circuit (14V 0.8A mc34063), original LW power supply to galvo drivers (+24V 1.5A(used to charging battery when working from 220V), -24V 1A).
Senior Member
My laser
and
Senior Member
Nice, I'm lovin' them integral bounce mirrors!My laser
and
Ian
Doc's website
The Health and Safety Act 1971
Recklessly interfering with Darwin’s natural selection process, thereby extending the life cycle of dim-witted ignorami; thus perpetuating and magnifying the danger to us all, by enabling them to breed and walk amongst us, our children and loved ones.
Senior Member
got anymore pics of your projector?My laser
and
Eat Sleep Lase Repeat
Posting Permissions
Reply With Quote
