DO TELL!!! Please let us know what happened with YOUR LaserWorld Lasers projector!!! Look at THIS THREAD and share YOUR experience!!
-Marc
DO TELL!!! Please let us know what happened with YOUR LaserWorld Lasers projector!!! Look at THIS THREAD and share YOUR experience!!
-Marc
ILDA- U.S. Laser Regulatory Committee
Authorized Dealer for:
- Pangolin Laser Software and Hardware
- KVANT Laser Modules & Laser Systems
- X-Laser USA
- CNI Lasers
- Cambridge Technology & Eye Magic Professional Scanning Systems
FDA/CDRH Certified Professional LuminanceRGB Laser Light Show Systems
Hi Anderino.
I usually don't suggest this as I don't know much about lasers inside-especially electrical stuff, but with your budget you should try to build it yourself and learn. It doesn't to be anything spectacular, but it will give you lot more satisfaction and fun than that crap from ebay where all you probably pay for is transit from China and rest is worthless.
Good luck!
The misses has allowed me to spend about £1000 (what I had to do to get that!!!) Me thinks I might make my own!
I'm with you there Kiwi, lasers are friggin awesome, the colours just amaze me!
That's a great start man! I'd suggest ScanPRO 30's or DT 40's for your galvo set. A Pangolin FB3 controller/software and a good 532 green from Laser-Wave and maybe a 640nm red If you can make the dollars work. You would also need misc items like optics mounts, (And a dichro if you want to add a color.) aluminum base plate and fastening hardware. You can easily come out with a quality projector with $1000 UK bucks and a little tinkering and patience.
Don't worry about the electrical end. Many folks here are more than willing to help you fugure out how to connect things.
if you are local i know a good place to get a custom case made
Eat Sleep Lase Repeat
Been talking to Rob (Stanwax) with regards to lasers, coming up with some nice prices!
How much would Pangolin FB3 controller/software set me back?
Also am I correct in thinking (in a very crude way) that I connect the drivers of the galvos to the controller and also connect the laser drivers to the control board too?
How much tinkering is involved once I have it all wired up?
Sorry for all the questions, I'm getting excited lol!
size depending -
custom case
alum plates
sprayed black
£200 ish
Eat Sleep Lase Repeat
I believe the FB3 goes for around $500USD. You'd have to check with pangolin to get their latest prices and configuration. http://www.pangolin.com/contact/
Wiring the projector is fairly simple. The FB3 can be connected internally to the projector or attached with a DB25 ILDA cable. The power supplies are usually independent due to voltages. You usually have one power supply for both galvo amps and one or two power supplies for your lasers. From there the controller would supply the input signals to each laser driver for blanking and the input signals for each galvo. Here is a wrightup by Bill Benner, owner of Pangolin, that may help answer some of your questions. http://www.laserist.org/laserist2008...onnections.htm
Once your projector is all wired up, It shouldn't take long after to align your laser(s). However, Aligning 2 or 3 lasers is no where near as easy as aligning one.