Cheers guys, really appreciate the help![]()
Cheers guys, really appreciate the help![]()
rotory solenoids - ledex for example - you can find them on ebay. As someone mentioned they're noisy, but you can't hear them over most music. Ledex also makes linear solenoids called something like softshift... These are as quiet as you want them to be - at the cost of speed - they can also be run with a feedback loop and do whatever you like. - which sounds cool but complex. Another alternative is a motor with a mirror driven between two (or more) stops. We used to use meter movements as "beam kills" in the Laserium projectors in front of the scanners - If the movement is beefy enough or the mirror small enough that could work too. Save the gm20s for intensity control...
Brian
another option would be to use dmx to drive RC servos.
We have a single channel board here : http://lasershowparts.com/store/inde...&productId=173 and a 8ch board in development.. Just need to find some time..
![]()
KVANT Australian projector sales
https://www.facebook.com/kvantaus/
Lasershowparts- Laser Parts at great prices
https://www.facebook.com/lasershowparts/
KVANT Australian projector sales
https://www.facebook.com/kvantaus/
Lasershowparts- Laser Parts at great prices
https://www.facebook.com/lasershowparts/
I was wondering if anyone has ever used a binary scheme to pickoff beams? The first solenoid controls one mirror, the second controls two mirrors, and the third controls four mirrors - resulting in 8 output beams from 3 solenoids…
binary beam dwg.jpg
Someone here made a box here that does something similar with manual switches... I just forget who.![]()
The orginal beam is divided into two paths by the first solenoid
These two paths are divided into two more paths by the second solenoid
These 4 paths are divided into 4 more paths by the third solenoid
the four fixed mirrors at the top of the drawing simply reflect the "top" four beams in the same direction as the "bottom four" beams.
binary beam dwg 2.jpg