Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: Optical breadboard

  1. #1
    Join Date
    Jul 2009
    Location
    Essex, UK
    Posts
    53

    Default Optical breadboard

    Anywhere know where I can get a cheap breadboard in the UK, can get a slab of Alu for £40 but as soon as its got holes all over it they want £150!!

  2. #2
    Join Date
    May 2007
    Location
    The Netherlands
    Posts
    291

    Default

    optical breadbord and cheap do not excist in the same sentence
    Do not look into laser with remaining eye
    Need laser repair contact me !!!!!!

  3. #3
    Join Date
    Sep 2008
    Location
    Orlando, Florida
    Posts
    1,206

    Default

    I made my own from 1/4" aluminum plate and drilled and tapped 594 holes by hand. It is time consuming, but much cheeper that buying one prefab'ed.

    Lazerjock

  4. #4
    Join Date
    Jan 2007
    Location
    Yorkshire, UK
    Posts
    4,584

    Default

    PM sent.....
    Quote: "There is a theory which states that if ever, for any reason, anyone discovers what exactly the Universe is for and why it is here it will instantly disappear and be replaced by something even more bizarre and inexplicable. There is another that states that this has already happened.”... Douglas Adams 1952 - 2001

  5. #5
    mixedgas's Avatar
    mixedgas is offline Creaky Old Award Winning Bastard Technologist
    Infinitus Excellentia Ion Laser Dominatus
    Join Date
    May 2007
    Location
    A lab with some dripping water on the floor.
    Posts
    10,114

    Default

    Quote Originally Posted by Jem View Post
    PM sent.....

    make friends with someone who has a manual mill (bridgeport) and a autotapper or powertapper. Spend one long night on the shopfloor,

    Steve
    Qui habet Christos, habet Vitam!
    I should have rented the space under my name for advertising.
    When I still could have...

  6. #6
    Join Date
    May 2007
    Location
    Orlando, FL
    Posts
    1,090

    Default

    Quote Originally Posted by mixedgas View Post
    autotapper or powertapper.

    Steve
    I don't think I've seen any of those... you got any links?

    --DDL
    I suffer from the Dunning–Kruger effect... daily.

  7. #7
    Join Date
    Jul 2009
    Location
    Essex, UK
    Posts
    53

    Default

    Thanks guys, think am gonna go down the Aluminium sheet route and drill my own holes!

  8. #8
    Join Date
    Jun 2007
    Location
    Lake Geneva, WI.
    Posts
    2,704

    Default

    Quote Originally Posted by daedal View Post
    I don't think I've seen any of those... you got any links?

    --DDL
    What you are looking for is a "tapping head" That will give you some search results.


    Quote Originally Posted by anderino View Post
    Thanks guys, think am gonna go down the Aluminium sheet route and drill my own holes!
    Think "plate" versus sheet. 0.25" or thicker.

  9. #9
    Join Date
    Dec 2006
    Location
    denver,co
    Posts
    1,078

    Default

    The tapping head will cost more than having a machine shop do it.

    If you are going to do it your self here are some tips.

    I am assuming that you are going to be using a hand drill.

    Things you will need:
    Drill
    Drill bit : 5mm ( get a good one )
    Tap: m6 (spiral point, works WAY better than a standard gun tap.) get a couple you will probably break one.
    Taping fluid. ( really important!!! not optional) rapid-tap , cool-tool , tap magic. something similar. motor oil is not a substitute. Last resort WD-40.
    Punch (spring loaded)

    Drilling:

    Use spring loaded punch, layout your grid 24.5mm? and punch every hole location first.
    Drill holes. Use cutting oil on every hole. Drill, Deburr.
    Put the tap in your drill. Get real familiar with the forward and reverse buttons.
    Clamp the part down to something so it won't spin around.
    Dip or spray your oil on the tap:
    Start at a medium speed and and push the tap into the hole . Stop when you get through, reverse and back out of the hole. The tap will dictate how fast it feeds, just let it.
    After a couple of holes clean the tap if it is building up chips. compressed air works great for this or else a tooth brush. sometimes you can just blow on it.

    Make sure that you are perpendicular to the hole when tapping if you change your angle at all while in the hole you will snap the tap. They don't have much tolerance for off axis movement.

    I can not stress enough how important a tapping fluid is. Motor oil is designed to keep parts from making friction. Cutting oil is designed to allow friction but keep the cutting edge lubricated. Aluminum is also soft it will gall or build up on tools if you don't use some lube.

    good luck.

    Chad


    When the going gets weird, the weird turn pro.


  10. #10
    Join Date
    Jun 2007
    Location
    Lake Geneva, WI.
    Posts
    2,704

    Default

    Quote Originally Posted by chad View Post
    The tapping head will cost more than having a machine shop do it.
    Not really... http://cgi.ebay.com/Procunier-tappin...d=p3286.c0.m14

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •