Results 1 to 8 of 8

Thread: How to set up colour mixing?

  1. #1
    Join Date
    Jul 2009
    Location
    Essex, UK
    Posts
    53

    Default How to set up colour mixing?

    When combining RGB, how does the 'system' know how much of each colour needs to be added?
    Also, how does it know how much of each colour it needs to make the other colours?

    I mean I might have a really powerful green but a weak blue and red. Where would you set it to make it use say (for arguments sake) 60% green, 100% blue and 90% red?

    Cheers

  2. #2
    Join Date
    Jul 2007
    Location
    Knoxville, TN, USA
    Posts
    3,154

    Default

    That is generally considered to be a function of your laser controller and its associated software.

    For example, the Pangolin QM2000 / LD2000 features a software color wizard that can be used to "pre-balance" your laser outputs for the best color matching. After that, the software will automatically select the power level of each laser needed to provide the desired color.

    You'll generally want to try to select your lasers to provide the best "white balance" when your lasers are at maximum output power. This, in turn, means you'll get more total laser output (brighter beams & images) for any given color selection. There are a lot of discussions on this subject on this forum - just search the for "white balance", "color balance", etc.

    Also keep in mind that you only get the full color spectrum when you use analogue modulation, which means the laser power output is "infinitely variable" over a 0 to 5 volt modulation range. TTL modulation, where a laser is either completely on, or completely off, will only give you 7 colors to choose from, but can still be quite effective!

    Most modern controllers will support either TTL or analogue, so if you can swing the price difference, buy lasers with analogue modulation!
    Last edited by Stuka; 08-05-2009 at 13:16.
    RR

    Metrologic HeNe 3.3mw Modulated laser, 2 Radio Shack motors, and a broken mirror.
    1979.
    Sweet.....

  3. #3
    soforene's Avatar
    soforene is offline The Troll formerly known as Herbert Von Poople-Futtocks
    Join Date
    Aug 2007
    Posts
    2,942

    Smile

    Or quick answer.

    LD2000.


  4. #4
    Join Date
    Oct 2006
    Location
    Central Florida
    Posts
    7,067

    Thumbs up

    Quote Originally Posted by soforene View Post
    Or quick answer.

    LD2000.


  5. #5
    soforene's Avatar
    soforene is offline The Troll formerly known as Herbert Von Poople-Futtocks
    Join Date
    Aug 2007
    Posts
    2,942

    Wink

    Hey !!
    That's not how you spell Stuka !

  6. #6
    Join Date
    Jul 2009
    Location
    Essex, UK
    Posts
    53

    Default

    I see, cheers guys!
    Would FB3 take care of it?

  7. #7
    Join Date
    Jul 2009
    Location
    Essex, UK
    Posts
    53

    Default

    Quote Originally Posted by Stuka View Post
    That is generally considered to be a function of your laser controller and its associated software.

    For example, the Pangolin QM2000 / LD2000 features a software color wizard that can be used to "pre-balance" your laser outputs for the best color matching. After that, the software will automatically select the power level of each laser needed to provide the desired color.

    You'll generally want to try to select your lasers to provide the best "white balance" when your lasers are at maximum output power. This, in turn, means you'll get more total laser output (brighter beams & images) for any given color selection. There are a lot of discussions on this subject on this forum - just search the for "white balance", "color balance", etc.

    Also keep in mind that you only get the full color spectrum when you use analogue modulation, which means the laser power output is "infinitely variable" over a 0 to 5 volt modulation range. TTL modulation, where a laser is either completely on, or completely off, will only give you 7 colors to choose from, but can still be quite effective!

    Most modern controllers will support either TTL or analogue, so if you can swing the price difference, buy lasers with analogue modulation!
    Gotcha, now I get it!
    If, for arguements sake 60% green, 100% blue and 80% red made the perfect white, would the controller use 100% of each colour when doing beam shows or single colour animations or still only the lesser powers?

  8. #8
    Join Date
    Jul 2007
    Location
    Knoxville, TN, USA
    Posts
    3,154

    Default

    FB3 will take care of it just fine!

    Generally, beam frames will be treated like any other frame, and by default will use the adjusted color balance settings. However, most software will also allow you to assign a "full power" setting to a frame or group of frames, and which overrides the color balance settings.
    RR

    Metrologic HeNe 3.3mw Modulated laser, 2 Radio Shack motors, and a broken mirror.
    1979.
    Sweet.....

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •