Mark - you are a laser whore
If it comes to LEM5 then it MUST come to LEM5.5!!!!
Very nice work that man!
Mark - you are a laser whore
If it comes to LEM5 then it MUST come to LEM5.5!!!!
Very nice work that man!
--------------------
My Brain urt's!
Continuously in Awe! of (H)Al, the Photonlexicon Font of Complete Knowledge - The (H)Al'PL Database of complete puss that no one needs to know or ever trusts as he ain't really got a Scooby doo about now't!
Doc's website
The Health and Safety Act 1971
Recklessly interfering with Darwin’s natural selection process, thereby extending the life cycle of dim-witted ignorami; thus perpetuating and magnifying the danger to us all, by enabling them to breed and walk amongst us, our children and loved ones.
Gorgeous...
There are no words left to speak...
Gorgeous setup
We all waiting for more pics
my webpage
http://stevemilani.jimdo.com
Skype ID: stevemilani957
my RGB analogue projectors:
3.9 W (640/532/445) 30kpps
2.6 W (655/532/450) 30kpps
2.5 W (638/532/450) 30kpps
0.7 W (test unit)(635/532/473) 18kpps
Ok so after excercising extreme patience and waiting for that damned glue to dry, I got a little further...
I have built a fairly complex baseplate with a 6mm overall plate, the lasers are then mounted on a 12mm plate on top of the 6mm and the dichros sit on 10mm mounts screwed to a further 3mm strip... The whole thing then sits on rubber feet screwed through onto 25mm runners. The idea here is that when the case is sitting on the ground it is subjected to different forces to when it is hanging, so things are gonna move. The rubber feet should account for this, so hopefully it should never go out of line...
Underneath the heavily over engineered baseplate is a big fat heatsink. The 445nm and 640nm both run rather hot, so this should help get that heat away...
After lots of fiddling around, I got the beams aligned and saw white for the first time, and man it is very white...
So, here is a pic of the beam paths all mixing nicely and one of my feet...
And finally, that nice icy white beam. I am really pleased with this, as it is just white, no red outlines...
Once I can tear myself away from gauping at the lovely whiteness of the beam, I will get on with installing the electronics rather than having them strewn all over my living room floor...
Stay tuned
Mark
Very nice, Looks like we have another 445nm addict
KVANT Australian projector sales
https://www.facebook.com/kvantaus/
Lasershowparts- Laser Parts at great prices
https://www.facebook.com/lasershowparts/
Good job there mark, the heatsinks under the baseplate, are just how mine is setup
Bootiful !!
blah blah blah .....
Those are not DT40's are they?