To sell : custom made dual diode >450mW 660nm module

[sbk]

I have to sell my great old red module, which was made with love with my own little hands
Rock solid laser (the base is a 10mm alu plate), which made my pleasure for a few years now. But not used a lot, around 100 hours total. So yet plenty of lifetime is to be expected.

The diodes and drivers comes from Marconi (MAXyz), with high quality (and expensive) glass lens, and diode's housings are not the cheap aixiz ones.

Module comes complete but without the PBS cube, coz I had to keep it for my new quad red module.

I offer a big 40x40mm TEC with it, there's an adapted place on top of the laser to put it, under the heatsink.

Power is 500mW after optics with 5V on mod input, but usually I was using it at 450mW. It hadn't changed by a mW after several years so I think it's a reasonnable value (power showed in the picture is from a single diode).

Driver is of course analog.

Beam is <3x3mm at aperture, and 3.5x3.5mm at 5 meters (see attached picture @5m).

So if someone is interested, please make me some offers...

Sebastien

[sbk]

No one?

I looked around here and found that the second hand price for this type of module is ~700USD, but mine will be quite a few lower than that...

How's about 450USD (or 320€, or 275£)? Is it fair for this sort of laser?