Hello!
Ive been searching laser for some amateur shows and logo projection and found this one from ebay.
• Laser : Diode Laser
• Wavelength: red 650nm@300mW
green 532nm@150mW
blue 472nm @ 150mW
• Color:
red,green,yellow,cyan,blue Violet,Magenta,white(mixed)
• Scanner: ILDA30Kpps,+/-30 degree
Controlled by auto sound active or DMX .Mater / slave,ILDA linkable fu2 (24 channels), PC software
• High capacity and speed microprocessor control
• Rotation, Zoom (+/-),Rolling, dot drawing and 3D Animation etc
• Interface: ILDA DB-25 connector (Use to control the exterior computer .When the ILDA interface connected to the exterior console,light will automatic change to exterior console,and need not to convert switch )
• Cooling method : Fan cooling
• Power supply: 120V, 60Hz
• metal casing : 640*304*266mm Net Weight : approx. 15Kg
• Have Key On/Off Switch,that can prevent unauthorized use and the DB9 plug can be used for remote control
• Applicable for Disco, Pub, Bar, Clubs, large stage, entertainment center, trade show, corporate special events, casinos,etc
Can Run VIA DMX or with included ITop Laser software
Looks good with or without Smoke/Haze.
Cost is 810$. Need some advise. I would use lt with Pangolin live pro and FB3 board. Im open to any advise or suggestions.
ILLIMAISTA