help wanted

[edison]

I designed a electronic circuitboard on paper and i was wondering if anyone could draw the circuitboard with a circuitboard design program.

It,s for my colorcontrol and my scansize. The one who designs it gets one for free of course including postage to where you live

[lasersbee]

I think we would need to see a schematic first...
and some basic info... like... what are the board limits....


Jerry

[DixiScan]

Hi Mr. Radio Repair Men,

You can do it yourself if you want !
Just download the free Eagle software at http://www.cadsoftusa.com/index.htm.en
It's very easy to use and it has a library already build in.
Just draw your schematic and the software will convert it to a ready to use (double layer) board. :-)

Maximum board to design is 100x80mm.

[edison]

thanks dixiscan and jerry. I already downloaded eagle but will learn how to use it later. I only want to have 3 pots and a stereo pot to control the colours and the scansize. The reason for that is when i have the board i know how the backpanel is going to be. I found a company that engraves the alumium plates for my universal lasercase. With this i can help other members who are looking for a case. So if someone can help me i can help others I will draw the layout on paper so someone only has to draw it the in eagle and print one out. The size of the board would be 10 cm long and 3cm high. Only one side not double layered.

[badger1666]

dont think i would go to all that trouble when you can do all that with four 10k pots fitted to the case, or are you trying to do somthing different ?

oops answered the question before i got chance to finish writing it

[edison]

I have a spacelas board with coloroutputs. I just want to make it more plug and play nothing else.

[krazer]

Send me the schematic, I should be able to make it up in eagle in no time, and have a license from school so I can draw boards 10cm long