rgb laser case wanted

[badger1666]

anyone know if there is anywere in the uk that sells laser case's ?

or does anyone have one they would sell

[Carl B]

Try talking to Insanity or P1t8ull. They have some nice cases.

Carl

[pelosh]

Hey Chris, this sounds like you are back on track! Great!
I do sell cases, but as I know you they are probably out of your budget .
It's good to hear from you anyway.

[RGbee]

Hey Chris, this sounds like you are back on track! Great!
I do sell cases, but as I know you they are probably out of your budget .
It's good to hear from you anyway.

Hi Martin.
When you say 'out of your budget', what sort of damage are we looking at?

[andy_con]

chris, if you have no joy with mark and simon let me know as i can get custom cases made for a good price

[badger1666]

Hey Chris, this sounds like you are back on track! Great!
I do sell cases, but as I know you they are probably out of your budget .
It's good to hear from you anyway.

hi martin
before you write me off i have about a 2k budget for the build
so some prices and pics and sizes would be cool
and its good to be back

[White-Light]

Hi Martin.
When you say 'out of your budget', what sort of damage are we looking at?

I can't find the thread but I think they were full size Spectrum cases (as used in the 5w) and they were from memory Euro 350?

[edison]

Hello badger

Just have a look at my case. http://www.photonlexicon.com/forums/...=begins&page=2 It,s made of 4 blank aluminium bosch-rexroth profiles mounted between two side panels. I have the drawing but not in Autocad. If someone can draw it in autocad an upload it on the FTP server from PL everyone her at PL can get a cheap case. The costs of the case is to draw it in autocad true the guy that works at the lasercutting company. If you profide a drawing in autocad it can be pretty cheap. To get a nice black finish you can paint it directly (NO PRIMER !) in heat resistant paint and put the panels in a oven at 200 degrees for 45 minutes. You will end up with a nice matt black finish and hard finish. That,s the way i did it. Good luck! I will bring the case to the next meeting in holland so dutch pl members can share their findings afterwords on pl.

[badger1666]

hi
whitelight you are correct found the answer here http://www.photonlexicon.com/forums/...tb+case&page=2

£305.00 for a case made from £50 worth of ally yeah what ever
rather make my own at that price and its a bit to big,
looking for one 300mm w x d 250mm x h 200mm ,
or somthing i would squeeze a regular rgb set up in
any ideas anyone

[p1t8ull]

I may possibly have a used one going spare Chris, I'll check stock over the w/end..