Page 1 of 2 12 LastLast
Results 1 to 10 of 19

Thread: Seeking advice on a burning laser project!

  1. #1
    Join Date
    Sep 2009
    Posts
    5

    Question Seeking advice on a burning laser project!

    Greetings everyone! First poster here—I'm excited to discover your community!

    I'm working on a laser oscilloscope project and I want to be able to singe/burn/etch/cut white paper, such as a nice, dense watercolor paper. Can anyone lend me any suggestions or recommendations as to the type and power of laser diode?

    My professor initially recommended I take out the diode from a DVD burner, but I just found some Blu-ray burner diodes on eBay (such as this one) that look like they would do the trick. Others had suggested a 405nm laser anyway for burning paper.

    Can anyone corroborate this or add any advice? The laser will be scanning back and forth at a fairly high rate (ideally), so I'm concerned that the paper will not really heat up enough to burn. I'd love to be able to get a varying amount of discoloration and burning on the paper, but hey, I'll take what I can get

    Thanks so much in advance! I look forward to hearing from you

  2. #2
    Join Date
    Oct 2006
    Location
    Central Florida
    Posts
    7,067

    Laser Warning Interesting first post...

    Someone can correct me if I am wrong, but I think visible lasers are the worst for cutting things; although if you are new to lasers, being able to see the beam is a plus. The key to a laser cutting is the focal point. 405 might be a good choice.
    Love, peace, and grease,

    allthat... aka: aaron@pangolin

  3. #3
    Join Date
    Jun 2008
    Location
    Yellowknife, NT, Canada
    Posts
    2,147,484,113

    Default

    Quote Originally Posted by allthatwhichis View Post
    Someone can correct me if I am wrong, but I think visible lasers are the worst for cutting things; although if you are new to lasers, being able to see the beam is a plus. The key to a laser cutting is the focal point. 405 might be a good choice.
    405 will burn paper fairly quickly, but I don't think it will do too well when its moving. Might want to consider some high powered IR (CO2 or diode @808nm) at several watts.

  4. #4
    swamidog's Avatar
    swamidog is offline Jr. Woodchuckington Janitor III, Esq.
    Join Date
    Nov 2006
    Location
    santa fe, nm
    Posts
    1,545,836

    Default

    Quote Originally Posted by virgil_disgr4ce View Post
    Greetings everyone! First poster here—I'm excited to discover your community!

    I'm working on a laser oscilloscope project and I want to be able to singe/burn/etch/cut white paper, such as a nice, dense watercolor paper. Can anyone lend me any suggestions or recommendations as to the type and power of laser diode?

    My professor initially recommended I take out the diode from a DVD burner, but I just found some Blu-ray burner diodes on eBay (such as this one) that look like they would do the trick. Others had suggested a 405nm laser anyway for burning paper.

    Can anyone corroborate this or add any advice? The laser will be scanning back and forth at a fairly high rate (ideally), so I'm concerned that the paper will not really heat up enough to burn. I'd love to be able to get a varying amount of discoloration and burning on the paper, but hey, I'll take what I can get

    Thanks so much in advance! I look forward to hearing from you
    i have a 20 watt co2 laser that would do the trick...

    suppose you're thinkin' about a plate o' shrimp. Suddenly someone'll say, like, plate, or shrimp, or plate o' shrimp out of the blue, no explanation. No point in lookin' for one, either. It's all part of a cosmic unconciousness.

  5. #5
    Join Date
    Sep 2009
    Posts
    5

    Red face

    Wow, awesome... that 20W sucker looks like it would work amazingly well. I should add a few things:

    1) I'd like to project the beam on a fairly large piece of paper (like 24" x 36") so the throw would likely need to be 5-10 feet. I've read that IR beams tend to not collimate well (?); I would want a very tight collimated beam, though presumably I could focus the beam since the paper would be fixed, but it would still be relatively far away.

    2) Budget! Naturally this is a school project budget... I've found various diodes (around 1W) on eBay for less than $100, I wonder if those would work...

    3) For clarification, I'm essentially building this and trying to burn paper with it. Say I had a high scanning rate with the trace fixed; do you think the paper would still heat up enough to burn?

    Thanks guys (and girls ), you are awesome!!

  6. #6
    swamidog's Avatar
    swamidog is offline Jr. Woodchuckington Janitor III, Esq.
    Join Date
    Nov 2006
    Location
    santa fe, nm
    Posts
    1,545,836

    Default

    Quote Originally Posted by virgil_disgr4ce View Post
    Wow, awesome... that 20W sucker looks like it would work amazingly well. I should add a few things:

    1) I'd like to project the beam on a fairly large piece of paper (like 24" x 36") so the throw would likely need to be 5-10 feet. I've read that IR beams tend to not collimate well (?); I would want a very tight collimated beam, though presumably I could focus the beam since the paper would be fixed, but it would still be relatively far away.

    2) Budget! Naturally this is a school project budget... I've found various diodes (around 1W) on eBay for less than $100, I wonder if those would work...

    3) For clarification, I'm essentially building this and trying to burn paper with it. Say I had a high scanning rate with the trace fixed; do you think the paper would still heat up enough to burn?

    Thanks guys (and girls ), you are awesome!!
    from a safety point of view, you really don't want to be projecting enough energy to burn something 5-10 feet. with that much energy, you want to take a lot of precautions. if it will burn paper, it will burn skin and eyes.

    think about enclosing every aspect of the beam path.

    is there's a reason that you're keen on burning instead of just projecting?
    suppose you're thinkin' about a plate o' shrimp. Suddenly someone'll say, like, plate, or shrimp, or plate o' shrimp out of the blue, no explanation. No point in lookin' for one, either. It's all part of a cosmic unconciousness.

  7. #7
    Join Date
    Sep 2009
    Posts
    5

    Default

    Well, I'm looking for a way to make innovative drawings—it's basically an art project. I fully agree that the amount of power would be exceedingly dangerous, and I was in fact planning on fully enclosing the beam path.

    It seems like my biggest issues are cost and distance. Would there be any way of treating paper to help it burn the trace of the laser, without having the whole sheet catch fire?

  8. #8
    swamidog's Avatar
    swamidog is offline Jr. Woodchuckington Janitor III, Esq.
    Join Date
    Nov 2006
    Location
    santa fe, nm
    Posts
    1,545,836

    Default

    Quote Originally Posted by virgil_disgr4ce View Post
    Well, I'm looking for a way to make innovative drawings—it's basically an art project. I fully agree that the amount of power would be exceedingly dangerous, and I was in fact planning on fully enclosing the beam path.

    It seems like my biggest issues are cost and distance. Would there be any way of treating paper to help it burn the trace of the laser, without having the whole sheet catch fire?
    what about thermal paper like what was used in old school fax machines?

    you would need way less power and there would be less risk of starting fires.

    http://www.paperrollsplus.com/
    suppose you're thinkin' about a plate o' shrimp. Suddenly someone'll say, like, plate, or shrimp, or plate o' shrimp out of the blue, no explanation. No point in lookin' for one, either. It's all part of a cosmic unconciousness.

  9. #9
    Join Date
    Sep 2009
    Posts
    5

    Default

    Hey, that's a really great idea! I will definitely try that. I'd still ideally do drawings on some nice thick watercolor paper, but I've got to start somewhere

    Does anyone have experience with anything like this? It looks like a great place to start...

  10. #10
    swamidog's Avatar
    swamidog is offline Jr. Woodchuckington Janitor III, Esq.
    Join Date
    Nov 2006
    Location
    santa fe, nm
    Posts
    1,545,836

    Default

    Quote Originally Posted by virgil_disgr4ce View Post
    Hey, that's a really great idea! I will definitely try that. I'd still ideally do drawings on some nice thick watercolor paper, but I've got to start somewhere

    Does anyone have experience with anything like this? It looks like a great place to start...

    have you thought about mounting a high power diode on something like this?

    http://cgi.ebay.com/ROLAND-DXY-880-F...d=p3286.c0.m14

    white paper is pretty reflective, but I'll bet you could pull it off by properly focusing that 500mw diode.
    suppose you're thinkin' about a plate o' shrimp. Suddenly someone'll say, like, plate, or shrimp, or plate o' shrimp out of the blue, no explanation. No point in lookin' for one, either. It's all part of a cosmic unconciousness.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •