Support your local Janitor- not solicited
.
Laser (the acronym derived from Light Amplification by Stimulated Emissions of Radiation) is a spectacular manifestation of this process. It is a source which emits a kind of light of unrivaled purity and intensity not found in any of the previously known sources of radiation. - Lasers & Non-Linear Optics, B.B. Laud.
Thanks for the feedback, guys...it's all very helpful. I've got a LED-based lighting rig planned out for less than $800, so I can put at least $400 into laser effects; are you saying I can't even get one good laser for that? I've seen many on E-bay for the $100-$250 ballpark; are they probably junk?
You will be disappointed most likely, if you want lasers for a big show you can rent a projector for the evening and get better bang for your buck. If you really really want to be sure you have lasers the only cheap ones I recommend are the "fat beam lasers" which will work fine with your DMX controlled lights or on an automatic mode. But I would take Pat's advise, wait on the lasers, get a hazer, more lights/lighting bars/trusses/safety cables and a nicer DMX control board.
-Adam
Support your local Janitor- not solicited
.
Laser (the acronym derived from Light Amplification by Stimulated Emissions of Radiation) is a spectacular manifestation of this process. It is a source which emits a kind of light of unrivaled purity and intensity not found in any of the previously known sources of radiation. - Lasers & Non-Linear Optics, B.B. Laud.
Thanks, Adam and everyone...I'll keep reading and try and decide what to do...but rental sounds like a decent substitute.
Floydfan said.rental sounds like a decent substitute
also it will be good education .... you will see how its done professionaly and to a safe standard ..... how to achieve the best effects ... also the restrictions set up at certain venues .... once youve seen how its done .... you can invest your hard earned cash into a decent laser system
but at the same time why not start to build your own " cheap hobby laser projector" to get a feel whats its all about ... i can asure you once you get the bug ... the word "cheap" is no longer found in the photon dictionary
all the best ... Karl
Sorry for jumping in to this thread so late (been out of town), but I wanted to welcome FloydFan to the forums.
Something that needs to be stressed in this thread is the fact that lasers are EXPENSIVE. Much more so than lighting gear. Also, lasers are a pain in the ass when it comes to legal issues here in the US. You absolutely *must* use compliant equipment (as defined by the Center For Devices and Radiological Health, which is part of the US FDA), and you must also have a variance from the CDRH before you can legally perform laser shows.
We can help you work through the process of filing a laser product report and obtaining a variance, but it's a long process that is not recommended for beginners.
By the time you get everything else you need to make that laser safe and legal, you'll have spent a lot more. Better to wait until you're more familiar with what various projector designs are capable of. Then you can decide if it's worth it to spend all the money needed to put a show together. (As several people have mentioned, you can always rent a show for one or two of your really big gigs, just to see how they fit with your band...)
Yep.I've seen many on E-bay for the $100-$250 ballpark; are they probably junk?If you want specific examples, search the forums for "LaserWorld" and you'll get pages and pages of information about crappy projectors that people bought on E-bay and are now using for door stops. Learn from their mistakes and save your money!
Note that you may want to experiment with lasers on your own while your band is growing. As Karl mentioned above, you can learn a lot about lasers just by being a hobbyist. Then, if you do decide to start doing commercial shows, at least you'll have a comfortable background to help guide you.
Also note that there are no legal requirements you need to meet if you're just playing around with a laser projector in your basement or garage. (There are safety issues, obviously, but if you screw up you'll have no one to blame except yourself, and no one else will be able to sue you.) But as soon as you set up a laser projector at a gig, you're firmly under the jurisdiction of the CDRH, and you don't want to be there until you're 100% legal. (See this thread for information about what happens when the CDRH catches you...) You'll also need event insurance, but that's a completely separate discussion!
Adam
Last edited by buffo; 10-03-2009 at 09:56.
Thanks, Adam...that was a very helpful post (this forum seems full of good people!). I've discussed it with the band, and I think we're going to put our full budget into lighting and re-assess lasers when we are more equipped financially. Clearly people expect a Floyd tribute to have lasers, but we can always hire pros at first as you all have suggested here rather than going half-cocked with crummy DJ lasers.
How do you go about getting into "hobby lasers"? Are there kits or something? Sounds like a good idea; I'm not very knowledgeable at all about electrical work, but I like tinkering with stuff...
![]()
Well, many of the members here have started as hobbyists, so there are lots of stories. Probably the cheapest way to get started is to build everything yourself. If you're reasonably handy with a soldering iron you should be able to manage it. (If you get stuck, come here and post your questions. We'll help you.)
You can buy bare red diodes for like $12 these days, and with a proper mount ($25) and a driver ($35) you can get in excess of 200 mw out of one. Add an off-the-shelf 50 mw green laser module for $130 and you're on your way. (A 250 mw RGY projector is a nice starting point. Not so bright that it's a death ray, but bright enough to let you see how cool a laser show can be.)
Cheap galvos (made in china of course) can be had for around $200. Sure, they flicker a good bit when you do graphics, but if you're just starting out, they're good enough to get your feet wet.
Dichros and optics are reasonable... You can get a pass-green, reflect red dichro for around $35, and a mount to go with it for about the same. Put all these components on a plate, add a power supply, some switches, some indicating lights, and a few connectors (call it another $100 for these parts, and that's being generous), and for around $500 you'll have a projector capable of doing red, yellow, and green that will look *great* in a dark room with some fog.
Sure, it won't be bright enough to do a real professional show with (and it lacks several features needed for a commercial show, especially the variance), but it will allow you to experiment with it in your basement or garage. Pick up a $30 fog machine at walmart and you'll be all set.
Of course, you will still need a controller to run your projector. You can build one very cheaply using a sound card (with a few key modifications), and there are some free software packages available that you can use to get started. This route is very cheap ($50 or so), but it's likely that you'll want something better after a while.
Commercial controllers with software start at around $350 or so. For $595 you can get the Pangolin FB3 eval kit, which includes the controller and a complete software suite. Mamba Black + the Easylase USB controller will run you around $800. And if you *really* want to get started with a bang, you might want to consider the Pangolin LD-2000 Intro package. The price is rather steep ($1500), but you get a world-class controller that you'll never outgrow, and you'll also get over 110 laser shows and over 2 gigs of content that you can use to make your own shows.
If you can make it to a Laser Enthusiast's Meeting near you, that would be a great way for you to see some of these controllers and software packages in person. Being able to "test drive" the software before you buy makes a big difference, and can save you some money in the long run.
For example, when I got started, I started out small with a very cheap (and very buggy) controller. As time passed, I kept upgrading to the next best controller, mostly because in those early years I thought that it was outrageous to spend $1000 or more on a controller. But since I'd never seen what a high-end controller could do, I thought that anything that would put pictures on the wall was good enough for me. Eventually I went to my first Laser Enthusiast Meeting and was completely blown away by DZ's RGB projector running Pangolin's LD-2000. And yeah, if I had it all to do over again, I would have saved my money and gone straight to the LD-2000 (which is what I'm running now).
I know you said you are in Washington DC, but do you ever travel to the southeast? We're planning a Florida Laser Enthusiast's Meeting for the first weekend in December... It will be held about an hour north of Orlando. If there's any way for you to make the trip, I promise you won't be disappointed. We'll have 6 to 8 full-color projectors set up, and one hell of a sound system too. It would be a good learning experience, and would probably be quite motivational as well. Nothing gets you revved up to build your own projector quite like seeing an awesome full-color show running on someone else's projector that they built in their garage... (Hey, if *he* can do it, *I* can do it too!)
Adam
PS: One of our members has about an hour's worth of Pink Floyd shows (professionally produced) that he purchased a couple years ago. Those shows will be playing at the Laser Enthusiast's Meeting in Florida, if you'd like to check them out.
Ok Adam, you've talked me in to it, where do I sign?
Man, you should be in sales!
In fact; I might just accidently on purpose time my Orlando visit to coincide with a SELEM
Ian
Doc's website
The Health and Safety Act 1971
Recklessly interfering with Darwin’s natural selection process, thereby extending the life cycle of dim-witted ignorami; thus perpetuating and magnifying the danger to us all, by enabling them to breed and walk amongst us, our children and loved ones.
wait, orlando? i've been in orlando all week!
"TO DO IS TO BE" - Nietzsche
"TO BE IS TO DO" - Kant
"DO BE DO BE DO" - Sinatra