Results 1 to 10 of 10

Thread: Protection from 2.1μm?

  1. #1
    Join Date
    Nov 2007
    Location
    Emmaus, PA
    Posts
    208

    Default Protection from 2.1μm?

    I recently acquired a pulsed Holmium:YAG laser, but most sites don't graph their goggles that far into the IR range. Any ideas where I could find some high OD goggles for this odd wavelength?

  2. #2
    Join Date
    Jan 2007
    Location
    Cupertino, California
    Posts
    2,130

    Default

    Check ebay, often they will show up from medical sources as Ho:YAG is a common wavelengh.
    CLICKY!!!

    Admin: In the immortal words of Captain Planet: YOU HAVE THE POWER
    Admin: (To quit being a bitch)

  3. #3
    Join Date
    Jan 2007
    Location
    Cupertino, California
    Posts
    2,130

    Default

    eBay item: 350257339678
    CLICKY!!!

    Admin: In the immortal words of Captain Planet: YOU HAVE THE POWER
    Admin: (To quit being a bitch)

  4. #4
    Join Date
    Nov 2007
    Location
    Emmaus, PA
    Posts
    208

    Default

    Ahh, things make a bit more sense now that i realize Holmium is actually an element and not just a series name / trademark >_>

    Thanks ben

  5. #5
    Join Date
    Jan 2007
    Location
    Cupertino, California
    Posts
    2,130

    Default

    I think I actually have a couple pairs of them here I can send you. Lemme check, and I'll get back to you in the morning.
    CLICKY!!!

    Admin: In the immortal words of Captain Planet: YOU HAVE THE POWER
    Admin: (To quit being a bitch)

  6. #6
    Join Date
    Jan 2009
    Posts
    1,622

    Default

    I'm pretty sure 2.1um is in the "eye safe" region.. I just read about an Ho:YAG system in an article from Stanford University in which they stated that 2.1um is eye safe.

    If you take a direct hit it might burn the surface of the eye from the sheer power, but I don't think they're as dangerous as near IR wavelengths since they are not focused on the retina by the lens.

    Here we go: http://www.rp-photonics.com/eye_safe_lasers.html

  7. #7
    Join Date
    Jan 2007
    Location
    Cupertino, California
    Posts
    2,130

    Default

    For a laser which makes 1.4J pulses, I don't think it would be appropriate to use no glasses.
    CLICKY!!!

    Admin: In the immortal words of Captain Planet: YOU HAVE THE POWER
    Admin: (To quit being a bitch)

  8. #8
    Join Date
    Jan 2009
    Posts
    1,622

    Default

    At that power level, definitely..

  9. #9
    Join Date
    May 2008
    Location
    Wisconsin
    Posts
    449

    Default

    But "eyesafe" is generally at the point where most solid objects are opaque to the wavelength anyway. Wouldn't that mean regular polycarbonate safety glasses would offer sufficient protection?

  10. #10
    Join Date
    Jan 2009
    Posts
    1,622

    Default

    Technically yes, but it would be irresponsible to suggest that proper goggles are unnecessary at these kinds of power levels.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •