yeah I have an oscilloscope and I think after this weekends work I'll have to sit down and test all 3 units.
yeah I have an oscilloscope and I think after this weekends work I'll have to sit down and test all 3 units.
Lasers, Lights, Music, Action!
Please enlighten us to the modification, as far as I can tell from the responses the issue is in the software. I will ask my friend to run it on his scope, hell even run the data logging. But it would be easier if the software solution(s) were actually posted by somebody rather than saying mine's fine cause I tweaked it so joe user you must be wrong (not saying you are doing that). And the solution should be documented, so people that have the problem can fix it (they wouldn't be looking for a solution if it were not a problem).
http://www.pangolin.com/forums/showthread.php?t=627 similar thread in the pangolin forum says measure output with a scope.
-Adam
Last edited by sugeek; 11-09-2009 at 11:20.
Support your local Janitor- not solicited .
Laser (the acronym derived from Light Amplification by Stimulated Emissions of Radiation) is a spectacular manifestation of this process. It is a source which emits a kind of light of unrivaled purity and intensity not found in any of the previously known sources of radiation. - Lasers & Non-Linear Optics, B.B. Laud.
Adam, it may be a solution, but for what problem? After I verified the change could be made, I put it right back. I can't speak for the FB3 because I don't have one, but on the QM2K, if I place 1 point in a frame, I expect it to be very faint. If I plan on that point being a "targeted beam" then I place the frame in that zone and renumber the frame to about 250 points.But it would be easier if the software solution(s) were actually posted by somebody rather than saying mine's fine cause I tweaked it so joe user you must be wrong (not saying you are doing that).
We just wont know with the FB3 until someone gets a scope on it and takes some pics. Though I'd bet it's working as designed.
Muhahaha I found it after a few hours of searching i knew i had found the Readouts of the Scope for the FB3
http://photonlexicon.com/forums/show...3+scope&page=2
Edit* well it may not be exactly what we want but its a scope of the FB3 witch covers more then most know now.... i think*
Here are some scope pictures, as requested DZ.
-Adam
Support your local Janitor- not solicited .
Laser (the acronym derived from Light Amplification by Stimulated Emissions of Radiation) is a spectacular manifestation of this process. It is a source which emits a kind of light of unrivaled purity and intensity not found in any of the previously known sources of radiation. - Lasers & Non-Linear Optics, B.B. Laud.
^What are we looking at there?
That thread does seem to contain some references to this same issue..Muhahaha I found it after a few hours of searching i knew i had found the Readouts of the Scope for the FB3
http://photonlexicon.com/forums/show...3+scope&page=2
Edit* well it may not be exactly what we want but its a scope of the FB3 witch covers more then most know now.... i think*
does no one like anything anymore?
why does someone always have to try pick holes in everything?
i think the fb3 is worth every single penny
Eat Sleep Lase Repeat
Nothing wrong with striving for perfection..
If I bought one and couldn't get full power out of my lasers I'd be pissed too.. Seems like kind of a big problem to me. I've been gradually saving up for a good DAC, and as it sits right now I'm going to be saving up until I can afford a QM2000.net.
Support your local Janitor- not solicited .
Laser (the acronym derived from Light Amplification by Stimulated Emissions of Radiation) is a spectacular manifestation of this process. It is a source which emits a kind of light of unrivaled purity and intensity not found in any of the previously known sources of radiation. - Lasers & Non-Linear Optics, B.B. Laud.