Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: Picked up some Coherent argon/krypton today

  1. #1
    Join Date
    Sep 2009
    Location
    san diego, ca
    Posts
    37

    Talking Picked up some Coherent argon/krypton today

    Rented a truck and drove to orange county today to pick up 2 Coherent medical lasers off of a tip from Buffo. Got them for a really good price. One is a Coherent 910 with a lexel tube. The other is a 920 with 2 Coherent I-90 tubes. One krypton and one argon. I have no clue as to their functionality, but everything looks good and I am optimistic. I'm just now waiting for a few friends to get off work to help me unload. I snapped a few pics.

















  2. #2
    Join Date
    Jul 2005
    Location
    Flying over a town near you
    Posts
    1,404

    Default

    Looks like you've got a killer deal...nice clean laser setups. Warn all in the area and please take pix of the carnage.
    You are the only one that can make your dreams come true....and the only one that can stop them...A.M. Dietrich

  3. #3
    mixedgas's Avatar
    mixedgas is offline Creaky Old Award Winning Bastard Technologist
    Infinitus Excellentia Ion Laser Dominatus
    Join Date
    May 2007
    Location
    A lab with some dripping water on the floor.
    Posts
    10,115

    Default

    Congrats on your picking up a pair of 910 and 920 med sleds.

    That is a Lexel BETA, derate to 2 watts max if you want it to live and watch out for its fragile brewster stems. Beta is a Lexel drop in replacement set for SP and Coherent.



    I have manuals for those, watch out the KR magnet will be wired to be in series with the tube. The dual sled has one PSU , and a means for switching over from one tube to the other.

    The psus are designed to the same general design as the lexel 95 psus, a buck boost and a linear passbank.

    Caution the yellow wire to the left of the bathtub cap on the single tube unit just doesn't look right.

    Caution, the current meter reads double the actual amperage. So at 30A it will read 60.

    Caution, Imax on the tubes is 35A

    Caution, if the tube pressure is too low the drop accross the plasma will pop parts of the power supply.

    Caution, remove the autofill board if installed on the dual, the beta will not have one.

    Caution, set taps on the buck boosts properly before running, I have the tap data.

    Caution, dont break your back or hurt yourself unloading those.

    Caution, there is lots of exposed DC and ignitor in that picture, call me and ask so I can tell you the hot spots!!!!!!!!!!!!!!!!!

    Warning, the alignment is very, very, very touchy on the med sleds, please think twice before turning a mirror adjust. critical confocal cavity, very hard to align.

    Warning, make sure the spare fuses laying in the tray are not shorting anything and the cards are seated before firing them up.

    Only two of the smaller control cards are really needed to run those, they can be rewired and made much simpler and lighter.

    Stuck into the chassis somewhere is usually a light green piece of a paper with the tube test sheets.

    Did you get manuals or am I having another dance with a photocopier?

    Did you get the remotes?

    You should see 4-5 watts all lines from the green I90MRA tube, a little less if its just a I90MA and maybe 1.5 from the KR. KR has red only optics and will favor 676 at low currents.

    Biomedical engineers are not known for doing good PMs and these and all they usually need is a pressure adjust and a optics cleaning and tweeking.

    If your going to strip them down to the sleds for show use, enjoy, its about 4-5 hours of work to remove those frames they are in.

    Obligatory safety warning, get a variance if you dont have one, goggles if you dont have them, and that is very nasty three phase in the supply and in the resonantors, it is easy to get killed servicing these if you work on them with the power on!!


    Steve
    Last edited by mixedgas; 11-13-2009 at 17:27.
    Qui habet Christos, habet Vitam!
    I should have rented the space under my name for advertising.
    When I still could have...

  4. #4
    Join Date
    Nov 2007
    Location
    Bend Oregon USA
    Posts
    3,350

    Default

    wow that argon krypton pair look great....WOW...
    Pat B

    laserman532 on ebay

    Been there, done that, got the t-shirt & selling it in a garage sale.

  5. #5
    Join Date
    Sep 2009
    Location
    san diego, ca
    Posts
    37

    Default

    Thanks guys. I will share the whole story. I picked these up from one of those ebay drop off seller locations. The drop shop is also a stationary store, much like a hallmark. These 2 lasers were sitting in the middle of the store. I was getting akward looks from all the moms and kids in the store when I was popping the covers to see the inside. Apparently someone dropped these off because they were in a storage unit. The owner didnt know what they were. This might drive some of you crazy, but I picked up both lasers for $300 plus the cost of $40 renting the truck

    Steve-Thanks for all the basics. I am by no means an experienced laserist or electrician. So I will need all the help I can get. I am in the process of wiring up my garage for 3 phase. My friend is an electrician but we probably won't get around to doing this for at least a few weeks. I will be searching for the suitable parts for 3 phase in the meantime. I hope to find a killer deal on a motor, breaker, wiring, etc. In the meantime, I will be reading and learning as much as possible to ensure I don't kill myself or anyone else

    Edit-The lasers did not come with a controller or manuals. I will further inspect the lasers tommorow and get back with any details.

  6. #6
    Join Date
    Oct 2006
    Location
    Central Florida
    Posts
    7,067

    Thumbs up Definatly a score worthy of the smiley of envy!

    Love, peace, and grease,

    allthat... aka: aaron@pangolin

  7. #7
    Join Date
    Jun 2007
    Location
    Lake Geneva, WI.
    Posts
    2,704

    Default

    Yes, Very awesome deal! Please post pics when you get them fired up.

  8. #8
    Join Date
    Nov 2007
    Location
    SoCal / San Salvador / NY
    Posts
    4,018

    Lightbulb

    Hey there SD -

    Quote Originally Posted by greanbeam View Post
    Rented a truck and drove to orange county today to pick up 2 Coherent medical lasers off of a tip from Buffo.
    Nice grab - if you're willing to truck them up the 405 some weekend, I would be happy to let you hook up here at Laser Images (birthplace of Laserium) and go thru every aspect of these systems with you - I've converted a few of these before and have (pretty much) all the 411 you'd need, from ops to safety to conversion to mods for shows... and then you can stop down and see our shows at the new home of Laserium at the Vine Theater in Hollywood (shameless plug ) and this way, when you go back to SD, you can tell all your peeps how 'amazing Laserium was' and 'heck yeah, it was worth the drive up', etc, etc.... - How's that for a handshake?

    Lemme know...

    peace
    j

    ps - I didn't post my pix to 'upstage' your very fine post it was just so'z you'd know I wasn't BS'n ya...
    peace...

    Pps - - saw your other post about a 'tesla coil' - yes, have one here, but to possibly save you a 'trip up', alternately, you can call up a local (SD) sign shop that does Neon - most likely, they'll have the handhelds (what I use for 'field testing') and they work fine for checking gas-intactity - you should be able to talk your way into getting one of the lads or lasses there to give your tubes a quick 'zap' (provided you can haul them over there) - or, they just might be willing to sell you one (but don't pay more than $75.! - just a tip - we can chat later...
    cya
    j
    Attached Images Attached Images
    Last edited by dsli_jon; 11-14-2009 at 00:07.
    ....and armed only with his trusty 21 Zorgawatt KTiOPO4...

  9. #9
    Join Date
    Jan 2006
    Location
    Charleston, SC
    Posts
    2,147,489,632

    Thumbs up Good deal!

    Well, I'm glad that worked out!

    You really got a deal too - they were listed on E-bay for $600. So getting them for half price is awesome. I agree with Pat, the tubes look brand new. And what luck to snag a Krypton/Argon pair! If it were me, I'd sell the Lexel Beta tube and use the PSU from that unit to run the Argon tube in the first one. Then you'd have a Krypton/Argon pair running. Plenty of whitelight for a *long* time!

    Adam

  10. #10
    Join Date
    Jul 2008
    Location
    Miami
    Posts
    506

    Default

    The 920 looks spotless !!!!!! Congrats !!! I had the krypton tube processed for white light in mine.
    " MANUFACTURER OF HIGH QUALITY MICRO LASER COMPONENTS" !!
    http://www.microlaserlabs.com/

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •