Page 2 of 5 FirstFirst 12345 LastLast
Results 11 to 20 of 50

Thread: Hello and inherited laser help

  1. #11
    Join Date
    Jan 2007
    Location
    Yorkshire, UK
    Posts
    4,584

    Default

    Quote Originally Posted by SamV View Post
    Why is there what seems to be two colour frequencies? 532nm 1064nm?
    The only light you will see from the laser is the 532nm (green). The 1064nm is infrared light which is beyond what the human eye can see (visible spectrum is between ~400nm blue to ~700nm red). It gets rather complicated, but the laser is a DPSS (diode pumped solid state) laser. These types of laser use special diodes emmitting (usually) 1064nm to 'pump' (or shine into) special optical materials, this 1064nm 'invisible' light is then frequency doubled using these special materials to give a visible light output of 532nm. It is possible however for some of the 1064nm light to 'get through' and be emitted along with the 532nm light.

    This is not a particularly good thing as 1064nm light is dangerous to the human eye and it is usual to fit an infrared filted to stop this light being emitted. It is quite possible that the piece of glass glued in front of the laser is an infrared filter. However, Laser Quantum are superbly built lasers (and very sought after ), I would be surprised if it didn't already have an IR filter fitted within the actual module.

    That's a very simplistic explanation, I hope it helps.

    Cheers

    Jem
    Quote: "There is a theory which states that if ever, for any reason, anyone discovers what exactly the Universe is for and why it is here it will instantly disappear and be replaced by something even more bizarre and inexplicable. There is another that states that this has already happened.”... Douglas Adams 1952 - 2001

  2. #12
    Join Date
    Nov 2009
    Posts
    24

    Default

    Ooh I'm quite excited now I'll get photos tonight

  3. #13
    Join Date
    Jan 2007
    Location
    Yorkshire, UK
    Posts
    4,584

    Default

    We like photo's
    Quote: "There is a theory which states that if ever, for any reason, anyone discovers what exactly the Universe is for and why it is here it will instantly disappear and be replaced by something even more bizarre and inexplicable. There is another that states that this has already happened.”... Douglas Adams 1952 - 2001

  4. #14
    Join Date
    Feb 2008
    Location
    East Sussex, England
    Posts
    5,248

    Default

    The piece of glass isn't part of the laser, it's just been glued and bolted to the baseplate about 15mm from the laser module.
    Could this piece of glass in fact be a lens of some kind?
    Personally I'd have had my money on an IR filter until Jem posted.

  5. #15
    Join Date
    Nov 2009
    Posts
    24

    Default

    To be honest I'm a newbie when it comes to lasers but I can't think what else it can be. So is there anyone in London who's able to measure the beam for brightness?

  6. #16
    Join Date
    Nov 2009
    Posts
    24

    Default

    So here are the pics. Sorry about the quality, also the camera kept having fits when focusing on the beam. Taken in a big hall with loadsa light and no smoke

    Side View


    The Back - Male and female 25pin dsub


    Lower Box - 9pin Dsub in, 15pin dsub out


    Internal Wiring


    Laser Module


    Beam - Wouldn't photograph properly


    From the front


    The top - You can see the piece of glass


    Another View


    More beam

  7. #17
    Join Date
    Oct 2006
    Location
    Central Florida
    Posts
    7,067

    Thumbs up

    Holy shit... I have had cars that looked better than that and wouldn't run!!!

    I say the laser PSU is on the bottom and the top is only an enclosure for the laser head and scanners that are not installed.

    I see potential in the set up but you need to tear it down and do some housekeeping first. Still a nice find.

  8. #18
    Join Date
    Nov 2009
    Posts
    24

    Default

    Does the module look powerful enough to be usable? Lol I did say it was in a bad state.

  9. #19
    Join Date
    Jan 2009
    Posts
    1,622

    Default

    If that laser isn't smoking that chair after a couple seconds or less, it's not making 1W.. It does look fairly powerful, though, given that it's in a brightly lit room with no smoke.

  10. #20
    Join Date
    Nov 2009
    Posts
    24

    Default

    Sadly not, it wasn't smoking the chain but the beam did feel "warm" Does it have to be the module or might it be the electronics behind it not putting out 1w?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •