Lasers and LED lighting for TRADE

[KGB]

I tried to sell these awhile ago but could only accept cash but now I'm back for TRADES!


I am working on building another scanner now (RGB) but I need parts. I am open to most any trade, as long as its scanner parts

Im looking for GREEN, or BLUE modules. Also a case, DAC, or other parts.

If you are interested in any of these projectors DROP ME A PM

I am located in the USA ans would like to try and sell it all on this side of the pond


---------------------------------------

Up first is my favorite, Its a BLUE 488nm 250mw (rated) ~35mw actual (complete guess) Argon laser scanner system 12k ILDA, DMX, Auto modes . Ready to go out of the box.
Its a Uniphase 2202-35LL, LL is the optics designator and means a custom part in this case FYI.
This laser starts perfect every time.
This laser has no AOM or shutter so it is constantly on (no blanking)

Here is the ILDA test pattern at 12k-remember this is only 12k + a soundcard dac running it so you could easily get better results-<-CLICK

This argon has a broken photocell so when it starts is jumps to ~full power(8A) and stays there (not that this was a problem for me )

This scanner comes with everything in this picture, including a LARGE pelican case to keep everything safe.

http://www.youtube.com/watch?v=V3mj-z9r7Go

---------------------------------------------------
Up next is my RGVP scanner. This has 2x 650nm 80mw modules, a 50mw 532nm module, and a PHR running at ~100ma.
The green module has a bad lens and loose wire somewhere. You should expect to have to fix the green module soon if you buy this.
The "P" in RGVP was supposed to be pink but the BR and RED beams dont actually mix, they just both come out of the same aperture.
The BR diodes driver is powered off of 1 or 2 9v batteries that attach to the rear of the laser.


http://www.youtube.com/watch?v=cEdAn...eature=channel

-----------------------------------------------------

Lastly I have my Current ?300mw? RGY. I don't have a power meter but this one was advertised as 200mw 650nm + 100mw 532nm 10k.<-I doubt the 650 is running at 200mw.
When I got this I quickly realized that the colors were way off so I had to turn down the green to get it to match and get a good golden yellow color(not seen in videos). The sound mode on this unit sucks(to me) but it has some cool DMX patterns. NO ILDA but comes with a case. The laser has a burn on the top from an incense stick and is missing the front black aperture piece.


YouTube messed up the framerates on these, Sry.

http://www.youtube.com/watch?v=Sub8q...eature=channel

http://www.youtube.com/watch?v=vbGyF...eature=channel

-------------------------------------------------

Thats all the laser related Stuff im trying to trade, but I have some other great stuff yall may be interested in as well.I have some LEDfx and DMX gear.

Chauvet LED-BAR (2x) - COLORbar


LightJockey 2- MARTIN LIGHTJOCKEY UNIVERSAL USB/DMX - Thomann Cyberstore Español


Chauvet COLORmist kit- Chauvet COLOR-MIST Rgb LED Panel System*-* LED Lighting Packages*-* LED Lighting*-* Lighting*-* PSSL.com


Martin Freekie DMX controller (1x)- Martin Freekie DMX Lighting Controller - Lighting Controllers - DJ Equipment & Effect Lighting: Soundmasters Direct



"Chauvet dmx board "- CHAUVET DMX-44 DMX CONTROLLER


LSC black DMX Board- same style as the Chauvet but nicer.

(SOLD)Elation DMX Dimmer 2x4CH- Amazon.com: Elation 4-Channel DMX Hybrid Dimming or Relay Pack, 600 Watts Max per Channel: Musical Instruments



American DJ PAR 64 LED- American DJ PAR-64 LED Par Can Fixture*-* LED Stage Color Changers & Color Wash*-* LED Lighting*-* Lighting*-* PSSL.com

[KGB]

1 Freekie SOLD and ONE left.

Dimmer is SOLD

[KGB]

I no longer need a red module thatnks to dream beamz and my new 635nm.

[edison]

I think fluff has a fb3 dac with live pro. I can get you a case. similar as mine. Next week the first 4 cases are cut and then ready for anodisizing.
I will organize a groupbuy within a mount for the case.

shoot me a pm if your interested in the case. Next week i can give people a price. I have to talk with SRS about it

I have also a laserwave thats almost never bin used. Its a 500mw doing 690 after warm-up.

[KGB]

I have a case, Just went in the mail to me Today.

[edison]

sorry Its a green 532nm.Bought it brand new and used it only in my bedroom for a few times.

I,m willing to sell my whole projector if someone is willing to pay a reasonable price. Its a quality projector with quality parts. I added even a spacelasboard with 128 gobo,s just in case yoou want to hang it in a club without a laptop.

My projector

http://www.photonlexicon.com/forums/...963#post127963

pictures:

http://www.photonlexicon.com/forums/...=edison&page=2

[KGB]

I will take cash offers for some items now, BUT I still need a green module(>300mw) and.......

• 8x GM20
• 10x Adjustable mirror mounts with FS mirrors
• 2-4x Transmission diffraction gratings
• RRGBBV Dichro's and mounts
• Blue Analog module >100mw
• RED 650 >1W
• FB3 DAC or better
• Lumia kit.
• SP20 kit
• 50/50 beamsplitter (glass not cube)
• 25/75 beamsplitter (glass not cube)

PM me any offers, cash or TRADE! Let me know what you want



Thanks,
-Brooks