Results 1 to 5 of 5

Thread: Pangolin Attenuation Map...

  1. #1
    Join Date
    Jun 2007
    Location
    Lake Geneva, WI.
    Posts
    2,704

    Default Pangolin Attenuation Map...

    Hey Everyone,
    I was fooling around with the attenuation map last light to blank out my camera lens. What's weird is I can pull up a grid test pattern and blank out the portion of the projection zone I wish to however, when I play the show the attenuation map has no effect. How do I hold the setting so it works in the show??
    Thanks!
    Adam

  2. #2
    Join Date
    Oct 2006
    Location
    Central Florida
    Posts
    7,067

    Post

    You have to save it as the projection zone default to the .ini.

    Settings->Projections Zones->Default tab->Save Settings into LD startup file.
    Love, peace, and grease,

    allthat... aka: aaron@pangolin

  3. #3
    Join Date
    Jun 2007
    Location
    Lake Geneva, WI.
    Posts
    2,704

    Default

    I figured you'd chime in! Thanks man!

  4. #4
    Join Date
    Oct 2006
    Location
    Central Florida
    Posts
    7,067

    Talking

    Quote Originally Posted by 300EVIL View Post
    I figured you'd chime in! Thanks man!
    I apologize for the delayed reply...

  5. #5
    Join Date
    Apr 2006
    Location
    Orlando, FL - USA
    Posts
    1,770

    Default

    In addition to what Aaron wrote, you also have to use the same zone for which you adjusted the BAM.

    For example, lets say you were "playing with" the BAM on Zone 1, and lets say you did save it to the "defaults file". Well if you then play back our beam shows, most of these will be played back on Zone 4, and so you won't get any effect...

    You need to adjust the BAM for the particular zone that you will be using in your show. Otherwise what you can do is copy your new BAM settings to "all zones" by using the "Copy" feature which is on the bottom of each zone-related feature.

    Bill

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •