I have problems with my new RGV projector, it just won't lase what colors I tell it to. The XY scanning works flawlessly in ILDA mode, but the colors are all messed up, and they are mixed, so it's not a mapping problem.
Basically, when I tell the laser to lase:
red, it lases white
green, it lases yellow
blue, it lases red
white, it lases magenta
EDIT: That is in 6channel mode on the sound card. On 8 channel mode as it should be, red turns blue and all other colors won't lase.
Do you guys have any idea what could be wrong? I use Spaghetti and sound card DAC, the colors work fine on my other projector.
I tried measuring current on the ILDA cable pins, and maybe that's where the problem lies: I measure current on many of the pins that should be dead (f. ex 1V or less eff.current on the green and blue pins when I only should lase red). But then why does it work fine in my other projector?
I know my pc is not very well isolated, do you think electric noise could be the problem?
It's not a huge problem, I mean it's still fun to watch shows on it, but it would be best to watch shows in the native colors.
Here's an example of how it should look and how it looks: