Hi guys,
I'm just starting with the drawings for my 1W 532nm DPSS laser with DT40 scanners and FB30 onboard.
I'll make a frame of 20x20x2mm alu profiles (dimensions: 540x400x200 mm). On the bottom of the frame, there are 2 40x40x2 alu profiles screwed on the bottom-profiles carrying a 6mm alu baseplate (and, creating a space of 40mm between the bottom-profiles and the plate). The side-panels and top/bottom-panels will be screwed at the outside of the frame and will contain (lots of) fans. The fans are not yet inserted in the drawing; however, at every fangrill there will be a fan (40mm fans at sidepanels creating a nice airflow below the 6mm baseplate cooling it down, and 80mm fans at front/backpanel to cool down the DPSS driver and scanner-amps/electronics).
The first simple drawings are attached.