[Edit] Ill be adding bits and pieces to this list as I discover them in my digging
XP Power 60W SMPS
12V @ 5A
---- SOLD
XP Power 40W SMPS
+12 @ 2A
+5V @ 6A
-12V @ 0.5A
3pcs - 25AUD each
XP Power 120W SMPS
+12V@6A
+5V@ 15A
-12V@0.8A
2pcs - $70AUD each
Lasever 300mw 532nm
New old stock, never been used other than to meter
Currently making 540mw
---- SOLD
Elation Palm Copilot
Used for testing a DMX board design.
Needs powersupply or batteries
1pcs - $50AUD
LSP DMX01R
single channel DMX relay board
Used, but works OK!
---- SOLD
L Brackets
New Old stock.
Lots here
buy 10pcs pay $50AUD
Small TEC's
**Many of these ones
TES1-03105
31 Couples
5A Imax
3.7 V Vmax
11.5W Qmax
15mm x 15mm x 2.9mm
**Not so many of these ones
TES1-04705.
47 couples
5A Imax
5.6V Vmax
17.4W Qmax
15X23x2.9mm
Price per TEC $7.50AUD - Some sold
Grating Gobo wheel thing
Bought as a part, spent a little time trying to get it to work, but gave up.
---- SOLD
Brass 5.6mm diode housing, M9, 0.5mm usual thread for lens
No mounting plate, beam height is 10mm from base
$10AUD per housing
Projector mounting rings
These allow a projector to have, for instance a separate scan head, which can be removed, or angled easily.
$50AUD per set, 2 sets
Folded sheet metal projector box. As per pictures
Includes lower case, front lid and "C" arm with star knobs.
Has pressed in standoffs to mount optics table inside
Dimensions ~ 40cm (wide) x 28cm ( deep ) x 11cm ( high )
$100AUD per box, 3 available
GM20 and driver and flag
driver can run off scanner psu
---- SOLD
Lasever 200mw 532
one metering 300mw, one metering 180mw
~200 hours on heads
supplied with XP power power supply
2pcs - $125AUD and $100AUD per 300 and 170 respectively
My laser page safety boards
Basic safety board, pulled from working laser
1pcs - $50AUD
die4drivepro
low side driver - no beam suppression
In built power supply to ensure diode is safe at all times
4pcs - $20AUD per board
Shipping extra PM and I will work out shipping costs