Hello ppl!
Today i finally got the last parts (tiny springs) to my project in making mirror mounts and although its not the correct material (Aluminium) it worked out pritty well.
Total sum of making one of these for yourself shouldent exceed 5-6USD.
here are some pics.
3x M5 Screws
2x Tiny 0.5mm Springs (found them at a local hardware store for 19USD 25Pack)
1x Small Metal Ball (to keep it stabilized)
1x Metal Ring
4x Tiny Metal Pins
1x Angled IronPin
2x IronPlates
The two ironplates that i drilled before i painted them with normal spray.
This is the backside of the ironplates. Notice the chromed spot, this is where the Litle Metal Pall will be positioned.
The tiny spring with the even smaller iron pin that will hold it in place. This was actually the hardest part to have the pin stay there while putting it the ironplate hole. I will use a litle dot of superglue next time.
The spring is in place
2 springs in place. :P
The mount is ready.
it works.
im sure many of you ppl know how to build this allready but just wanted share.
take care all.
/Rickard.