Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: Laserwave 532nm 3 watt dpss

  1. #1
    Join Date
    Dec 2007
    Location
    The West
    Posts
    1,285

    Default Laserwave 532nm 3 watt dpss

    Click image for larger version. 

Name:	photo 2.JPG 
Views:	35 
Size:	105.5 KB 
ID:	45785Click image for larger version. 

Name:	photo 1.JPG 
Views:	30 
Size:	116.9 KB 
ID:	45786


    SOLD , PENDING PAYMENT! THANKS...

    this is a Laserwave 3 watt 532 laser system.
    it has around 250 hrs of use (or less), I replaced it because it now lases barely.
    it is putting out around 15mW , with a solid single beam, im not sure what is wrong with it (either a bad KTP) or (bad pump diode).
    I have no time to mess with it, but maybe someone is looking for a project??
    the power supply and fans and lights all boot up normally, just a problem in the head/ module.

    anyways, if someone is interested in fixing it, shoot me an offer.

    thanks,
    Carlos
    Last edited by carlos3621; 12-26-2014 at 16:17.
    RGB laser projectors
    Pangolin Beyond .NET
    APC40 Midi controllers
    Pangolin FB3 controllers
    DZ splitter
    LS MegaWatt Green Machine

  2. #2
    Join Date
    Jun 2010
    Location
    FRANCE
    Posts
    88

    Default

    Hi Carlos,
    Interested, but i don't know where you are located ( for shipping )

    Regards.

  3. #3
    Join Date
    Dec 2007
    Location
    The West
    Posts
    1,285

    Default

    hi ams,
    I am located in the states, probably too expensive to ship to france??
    RGB laser projectors
    Pangolin Beyond .NET
    APC40 Midi controllers
    Pangolin FB3 controllers
    DZ splitter
    LS MegaWatt Green Machine

  4. #4
    Join Date
    Dec 2007
    Location
    The West
    Posts
    1,285

    Default

    btw,
    all the internals appear to be "serviceable", not cheaply glued together...
    RGB laser projectors
    Pangolin Beyond .NET
    APC40 Midi controllers
    Pangolin FB3 controllers
    DZ splitter
    LS MegaWatt Green Machine

  5. #5
    Join Date
    Jun 2010
    Location
    FRANCE
    Posts
    88

    Default

    Re Carlos,
    Quote Originally Posted by carlos3621 View Post
    hi ams,
    I am located in the states, probably too expensive to ship to france??
    I think too...if nobody in US are interested, let me know in the future...

    Regards, Christophe.

  6. #6
    Join Date
    Dec 2007
    Location
    The West
    Posts
    1,285

    Default

    will do Christophe,
    if nobody wants it, I'll PM you for a shipping quote..

    thanks,
    Carlos
    RGB laser projectors
    Pangolin Beyond .NET
    APC40 Midi controllers
    Pangolin FB3 controllers
    DZ splitter
    LS MegaWatt Green Machine

  7. #7
    Join Date
    Oct 2008
    Location
    Portland
    Posts
    1,565

    Default

    I might be interested, not sure what a reasonable offer should be.
    Support your local Janitor- not solicited .

    Laser (the acronym derived from Light Amplification by Stimulated Emissions of Radiation) is a spectacular manifestation of this process. It is a source which emits a kind of light of unrivaled purity and intensity not found in any of the previously known sources of radiation. - Lasers & Non-Linear Optics, B.B. Laud.

  8. #8
    Join Date
    Dec 2007
    Location
    The West
    Posts
    1,285

    Default

    Hey Sugeek,

    PM me your shipping address, so we can figure out what shipping is going to run...
    Ill take 100.00 plus shipping, if that works, let me know..

    thx,
    carlos
    Last edited by carlos3621; 12-24-2014 at 04:37.
    RGB laser projectors
    Pangolin Beyond .NET
    APC40 Midi controllers
    Pangolin FB3 controllers
    DZ splitter
    LS MegaWatt Green Machine

  9. #9
    Join Date
    Oct 2010
    Location
    Wiltshire, UK
    Posts
    579

    Default

    Hi Carlos, if this has not sold then let me know on a PM, ill have it.
    Cheers Tony.

    Quote Originally Posted by carlos3621 View Post
    Hey Sugeek,

    PM me your shipping address, so we can figure out what shipping is going to run...
    Ill take 100.00 plus shipping, if that works, let me know..

    thx,
    carlos
    Squat that bug,

    One day I'll finish my build.
    https://www.facebook.com/Azteclasers?fref=ts

  10. #10
    Join Date
    Dec 2007
    Location
    The West
    Posts
    1,285

    Default

    I will let u know asap Tony,
    Right now, your 3rd in line though...

    Thanks,
    Carlos
    RGB laser projectors
    Pangolin Beyond .NET
    APC40 Midi controllers
    Pangolin FB3 controllers
    DZ splitter
    LS MegaWatt Green Machine

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •