Results 1 to 4 of 4

Thread: fb3 causing the pc to crash

  1. #1
    Join Date
    May 2007
    Location
    Portsmouth
    Posts
    74

    Default fb3 causing the pc to crash

    Hi
    A while ago I bought a fb3 from one of the guys on here. I upgraded it to the usb version (and did the resistor mod, something about the power supply being a very old version and usb using more power) and all has been fine until recently.

    Now when I go to edit a frame with the laser connected the pc crashes.

    Would I be correct in suspecting the psu? if so is it ok to fit a more powerfull external psu and would this solve the problem?

    Martyn

  2. #2
    Join Date
    Jul 2008
    Location
    Eugene Oregon
    Posts
    952

    Default

    not sure but the first thing i would try is another computer (but thats not always doable)

    also giving pangolin a call would most likely get you some good answers
    -Josh

  3. #3
    Join Date
    May 2007
    Location
    Portsmouth
    Posts
    74

  4. #4
    Join Date
    Jul 2007
    Location
    Knoxville, TN, USA
    Posts
    3,154

    Default

    Contact Pangolin via their web site - they're usually pretty quick to respond!

    Quote Originally Posted by noiseboy View Post
    its the same on anouther laptop
    RR

    Metrologic HeNe 3.3mw Modulated laser, 2 Radio Shack motors, and a broken mirror.
    1979.
    Sweet.....

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •