Originally Posted by
dave321
...
i presume ........"The DMX daughter board on the FB3 is only used by the FB3
for direct FB3 control and playback......" refers to control by a dmx console and not through pc/laptop using quickshow?
dave321
Correct -
QuickShow can control the FB3 (any version) directly though its USB port, and control DMX devices using an Enttec DMX USB Pro.
As norty mentioned, if you happen to have an FB3 with a DMX daughterboard, you could control it as a "stand alone" DMX device using QuickShow-Enttec DMX USB Pro (or any other DMX console device), but you would definitely miss a lot of the FB3's functionality that way...
Last edited by Stuka; 04-17-2011 at 10:57.
RR
Metrologic HeNe 3.3mw Modulated laser, 2 Radio Shack motors, and a broken mirror.
1979.
Sweet.....