Mobolazer SC-DMX Scan DMX Channels

[wondertwnz]

Looking for a manual of at the leat list of the DMX Channels for the SC-DMX

Thanks
Larry

[Onge]

Looking for a manual of at the leat list of the DMX Channels for the SC-DMX

Thanks
Larry

It's a Mobolazer and is no longer made (as far as I can make out) but have found out it has 8 DMX channels but can't find anymore info.

Mobolazer are now Lumalaser and there web page is for 2007 !?!?!? so wonder if they exist now as well ?!?!?!?!?

Sorry can't be of more help,

Onge

[dsli_jon]

Hey Larry -

Looking for a manual of at the leat list of the DMX Channels for the SC-DMX

You could also call Selland Lissack at Laserworks - http://www.laserworks.us/contact-us/ ...they were involved with Mobo in making those, as I remember...

As far as I know, Lumalaser IS still in biz - you might try calling John (?? I forget the guys' name...) at Phantom Dynamics http://www.phantomdynamics.com/info.html - he has the 'inside' numbers (cels, etc) of the Luma-peeps, and can get ahold of them, even off-hours...

(I know I just sent you this in-reply to your email, but I figured I post these fyi's for anyone else searching for this in 'el futuro'....

peace..
j

[wondertwnz]

Will found ou the Laserworks guys only supplied the Scanners no the DMX Portion, and Lumalaser did not know either but had a good starting point for me so I will be able to figure it out.

Thanks all

Larry

Hey Larry -



You could also call Selland Lissack at Laserworks - http://www.laserworks.us/contact-us/ ...they were involved with Mobo in making those, as I remember...

As far as I know, Lumalaser IS still in biz - you might try calling John (?? I forget the guys' name...) at Phantom Dynamics http://www.phantomdynamics.com/info.html - he has the 'inside' numbers (cels, etc) of the Luma-peeps, and can get ahold of them, even off-hours...

(I know I just sent you this in-reply to your email, but I figured I post these fyi's for anyone else searching for this in 'el futuro'....

peace..
j

[MTWallet]

Attached is a preliminary pdf from their old website.

[Onge]

Attached is a preliminary pdf from their old website.

Very useful info thank you.

Onge

[wes]

last i heard a few years ago is that kyle of laseronics is a lead rep for lumalaser.
he is on this board.

i have a manual for my lumascan that runs off a little "smart" pad.

there are some dip switch settings for the whole rig, not just the scanner.
scanner runs off the "smart pad".
i run my box w/ just one dip switch up and everything comes through sliders/channels 1-8

i'll pm you if and when i find the manual..
not sure exactly if the info there on dip switches is what you need.

so i found my manual to my lumascan.
the back page has a dmx chart for functions of the scanner.
fans, beams text and such.
thing is i don't if that is what you are looking for and i think these scanners have gone through changes so unless you have the same one i do these values might not work.
if we can determine if this is the info you need, i can (eventually)photocopy and send it along.

again try kyle too.

[wondertwnz]

Man this is great
Thanks
Larry