Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Coming soon

  1. #1
    Join Date
    Dec 2008
    Location
    veenwouden
    Posts
    2,580

    Default Coming soon

    Hello guys,

    As some people know that i have worked the last year on getting my own modulees of red and blue. Now i,m getting closer and closer so just to show you guys the results her are some picturess of the red modules. I,m busy with getting my own driver so the first modules will be avialable with a flexmod and die4chill. The first module you see in the picture is now on its way to Rob Stanwax. The first modules are 90mmx70mm and 50mm in height. I have a smaller design that is coming soon. If everything goes well i should have bigger blues ready soon.

    The reds are available in 637nm, and a mix of 637nm and 660. The beamspecs are 3.5x3.5 with 0.65mrd.

    The models that are available are a single, dual, quad, 6 combiner and 8 combiner.
    Higher powers from 1.4 watt 637 are available but only in a mix of 637nm and 660nm

    Its just to show you guys what,s coming

    I have 25 housings for building quads and hopefully the driver will be soon ready. In the mean time a commercial driver like the Flexmod.

    stay tuned for more info
    Attached Thumbnails Attached Thumbnails P1090248.JPG  

    P1090263.JPG  

    P1090265.JPG  

    P1090233.JPG  

    P1090260.JPG  


  2. #2
    Join Date
    Dec 2006
    Location
    Essex, UK
    Posts
    8,648

    Default

    Edison you didnt reply to my PM
    Eat Sleep Lase Repeat

  3. #3
    Join Date
    Dec 2008
    Location
    veenwouden
    Posts
    2,580

    Default

    That,s right i was busy with glueing the mirrors on my quads to be. Pm is on you way.

  4. #4
    Join Date
    Dec 2006
    Location
    Essex, UK
    Posts
    8,648

    Default

    Quote Originally Posted by edison View Post
    That,s right i was busy with glueing the mirrors on my quads to be. Pm is on you way.
    ok
    Eat Sleep Lase Repeat

  5. #5
    Join Date
    Jan 2010
    Location
    Uppsala, Sweden
    Posts
    72

    Default

    Looks nice these little thingies!
    Good work!

  6. #6
    Join Date
    Dec 2008
    Location
    veenwouden
    Posts
    2,580

    Default

    Thanks Magnus!!!! It will be smaller in time but its good for now. Smaller is nice but not really nessesary stability is

  7. #7
    Join Date
    Apr 2006
    Location
    Miami, FL
    Posts
    3,590

    Default

    so I didn't quite understand, you can make 637nm modules up to 1.4W?

  8. #8
    Join Date
    Oct 2010
    Location
    Athens, Greece
    Posts
    1,930

    Default

    Quote Originally Posted by flecom View Post
    so I didn't quite understand, you can make 637nm modules up to 1.4W?

    an 8-diode setup using 637nm diodes 8*0.17 = 1.36 if i get it correctly
    "its called character briggs..."

  9. #9
    Join Date
    Jul 2007
    Location
    Brooklyn NYC
    Posts
    839

    Default

    Edison did you get my pm also ??

  10. #10
    Join Date
    Feb 2010
    Location
    Melbourne, Australia
    Posts
    1,106

    Default

    Quote Originally Posted by LaNeK779 View Post
    an 8-diode setup using 637nm diodes 8*0.17 = 1.36 if i get it correctly
    I read these can be run up to 200mW so with losses from combining...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •