Results 1 to 6 of 6

Thread: DZ Break out boards / BLUE DPSS Driver / MISC National Instruments stuff

  1. #1
    Join Date
    Dec 2006
    Location
    New Jersey
    Posts
    247

    Laser Warning DZ Break out boards / BLUE DPSS Driver / MISC National Instruments stuff

    EDIT: Sorry for the wrong thread location.... not sure how I did that!? LOL!!

    Hello Everyone,

    I was just in my lab and realized I could maybe re-coup a couple bucks and hopefully make some of you on the forum happy

    First up for sale....

    3 of the famous DZ breakout boards.... I had a couple bare boards I shared with the forum a month or so ago... I finally got some components to actually populate the last three.... Just populated this evening (BRAND NEW)

    A couple notes about these boards....

    The 16 pin connector housing for the "Pass-through" cable connection on the board was slightly oversized forcing me to soldier it on the reverse side of the board. The board is silk screened with the pin designation so there is no need for confusion.

    The right angle green LED and current limiting resistor are not populated as I preferred to mount the indicator LED away from the connector location for my setup.

    I am including the matching 16 pin connector and the terminating 25 pin D-Sub (ILDA connector) used for the pass-through cable (No ribbon included) plus a single green LED if you wish to soldier and fold to a right angle.

    These are the last three.... $30 / piece including shipping

    SOLD OUT

    Click image for larger version. 

Name:	DZ_Boards_Underneath.jpg 
Views:	16 
Size:	173.8 KB 
ID:	20116Click image for larger version. 

Name:	DZ_Boards.jpg 
Views:	31 
Size:	240.1 KB 
ID:	20119Click image for larger version. 

Name:	Complete_DZ_Board.jpg 
Views:	30 
Size:	198.3 KB 
ID:	20123Click image for larger version. 

Name:	Extra's.jpg 
Views:	9 
Size:	163.2 KB 
ID:	20124

    --------------------------------------------------------------------------------------------->I<

    Second up for sale:

    A LaserEver Blue DPSS driver (TTL)

    Label says: LSR-PS-1 #10022705

    I recently bought a complete blue DPSS laser (TTL) off of a member of this forum and purchased a new Analog driver for the laser... I figured someone on the forum may have a good use for it..

    $20 (Including Shipping)

    Click image for larger version. 

Name:	TTL_Blue_DPSS_Driver.jpg 
Views:	13 
Size:	211.3 KB 
ID:	20122


    --------------------------------------------------------------------------------------------->I<


    Third up for sale:

    2 x 50 pin National Instruments Connector Blocks (W/O Cable's)
    NEW condition (Doesn't look like they were ever used)
    Box label says : 777101-01

    $20 per block (Including Shipping)

    Click image for larger version. 

Name:	Connector_Block.jpg 
Views:	25 
Size:	204.7 KB 
ID:	20121


    ---------------------------------------------------------------------------------------------->I<


    Fourth up for sale:

    1 X National Instruments Cable
    Tag says: "185095C-02 - 2 Meters - 1505 1043"

    $30 (Including Shipping)

    Click image for larger version. 

Name:	NI_Cable_1.jpg 
Views:	4 
Size:	224.2 KB 
ID:	20118

    ---------------------------------------------------------------------------------------------->I<

    Fifth up for Sale:

    1 X National Instruments Cable
    Tag says: "182323E02 - 2 Meters - 0903 12506"

    $20 (Including Shipping)
    Click image for larger version. 

Name:	NI_Cable_2.jpg 
Views:	7 
Size:	818.6 KB 
ID:	20120

    --------------------------------------------------------------------------------------------->I<

    Sixth up for Sale:

    1 X National Instruments Cable
    Tag says: "SH6868 - 2 Meters - 1824 19B-02"

    $20 (Including Shipping)

    Click image for larger version. 

Name:	NI_Cable_3.jpg 
Views:	8 
Size:	790.2 KB 
ID:	20117


    ---------------------------------------------------------------------------------------------->I<

    PM me if you are interested... I will try to answer any questions you may have
    Payments through Paypal and will ship as soon as payment is recieved!
    Last edited by Admin; 10-27-2010 at 08:25.

  2. #2
    Join Date
    Oct 2006
    Location
    Cleveland, Ohio
    Posts
    2,342

    Default

    Somewhere, someone is looking at their expensive NI cards and wondering where the heck their expensive cables ran off to

  3. #3
    Join Date
    Dec 2006
    Location
    New Jersey
    Posts
    247

    Wink

    Quote Originally Posted by drlava View Post
    Somewhere, someone is looking at their expensive NI cards and wondering where the heck their expensive cables ran off to
    LOL!!!!
    Unfortunately I am the person looking for the very expensive NI cards to go with the cables

    I salvaged these on their way to the trash.... I am afraid the NI cards already made it to the dumpster.
    Sometimes people are careless and wasteful when cleaning up shop.

    If anyone on the forum has interest in these cables drop me a PM and we can certainly work something out.

  4. #4
    Join Date
    Apr 2005
    Location
    SOUTHAMPTON U.K.
    Posts
    1,357

    Default

    What NI cards are you looking for?
    I have some GPIB and DAQ cards available.

  5. #5
    Join Date
    Dec 2006
    Location
    New Jersey
    Posts
    247

    Laser Warning

    Quote Originally Posted by QUAZAR View Post
    What NI cards are you looking for?
    I have some GPIB and DAQ cards available.
    I am not quite looking for cards at the present time myself...
    I managed to salvage these cables from going to the dumpster and realised someone on the forum may appreciate them.

  6. #6
    Join Date
    Oct 2006
    Location
    Cleveland, Ohio
    Posts
    2,342

    Default

    I pulled an ISA AT-MIO-16E-10 today, if anyone can use it with one of these cables they can have it for shipping.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •