A few people have asked me to start a list of the equipment that we'll have at SELEM. If you're going to be attending SELEM, please reply with a list of the hardware you're planning to bring.
I'll have my ~600 mw solid state RGB projector, running off a Pangolin QM-2000 intro board. I may also have my HGM5 Argon (with the new ALC 903 tube) running off an older Pangolin QM-32 system. (No blanking on that system, and it might not make it to the event... It depends on whether I get the PSU work on the HGM5 finished in time or not.) I'll also have my copy of Mamba Black & dongle, so I'll be able to play some of those shows as well.
I'll have a bare optical plate wired up with a 100 mw DPSS green laser that we can use to install, test, and tune scanners.
The 9 ft square scrim we had at FLEM Mark II will be set up at the edge of the stage. I'll be bringing my Antari 1200Z fogger and a few fans to keep the auditorium fogged up. I'll also have a 16 channel mixer set up on stage so we can connect multiple audio sources to the sound system.
As always, I'll bring an assortment of tools, cables, and test equipment, including my oscilloscope and my LaserCheck. Tables and chairs are available at the venue in abundance. Wireless internet is also available in the lobby and at the very back of the auditorium seating area.
3 phase power (208) is available if you need it. 220 single phase (50 amps) is also available. Let me know well in advance if you need 220 V power.
Adam