the quad module you sold me was missing the aperture, so it's something i pay extra attention to. ;)
Quote:
Originally Posted by edison
Printable View
the quad module you sold me was missing the aperture, so it's something i pay extra attention to. ;)
Quote:
Originally Posted by edison
glad to help and if you need something or need help with anything just send me a PM. :)
no problems and i appreciate your excellent support. ;)
Quote:
Originally Posted by edison
I have the Knobs to fit on the front if you want one let me know :) It can hold a PBS to combine 2 quads:D
Sexy photo some posts up edison:)
Curious at cost for such a baby.
Im already getting 1.8W of 637nm so no need but still youre modules have perfect size and mrad^^
Just finished a new module for a customer well actually 2 quads combined and after combining they are doing 1100mw/637. Damn bright if you ask me. The beamsize is 18mm somewhat at 26 meter and 5 mm at aperture so about 0.5mrd. They will fit the larger 7mm x 12mm mirrors. It was quite allot of work to get them done but i,m happy with the result:)
Soon to come is a new driver on top of the module and the tecdriver that will be mounted on the inside. The driver on top of these modules is a single driver with tec but i reallised this is not practical when having an RB module Like Rizard has.
The next step will be the introduce a new Projector and a standard telescope on blue and red modules. ;)
Enjoy the Pictures:)
Mine didn't have aperture holes either. :(
I AM curious about that knob on the front though. How much would one of those run to put on one of my exisiting modules? I'm guessing it's some very fine drill and tap work.
Thanks in advance!
I have 50 of those lying arround. Just to be clear a KIT is a DIY thing and so the hole needs to be drilled after determination where the beam comes out. If you want such a Knob and a Lasever driver as a spare for your blue send me your adress and i will send it to you for free. Look at it as moral support for building your projector*DZ
PM sent - and thanks!:)
Hi Edison,
Just following up on this, as it has been about 6 weeks. Do you need me to send the address again?
Thank you! (And more pictures of the projector will be posted soon. :))