Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: ~40mW multiline argon

  1. #1
    Join Date
    Aug 2008
    Location
    the hills
    Posts
    983

    Default ~40mW multiline argon

    I have found a surplus DNA sequencer (ABI PRISM 377) which contains a multiline argon head and power supply. I googled trying to find mfg info of the laser inside, but i suppose i'm looking in the wrong place.

    If the head and PS inside are good, what would it be worth?

  2. #2
    Join Date
    Jan 2006
    Location
    Charleston, SC
    Posts
    2,147,489,632

    Smile

    Probably around $300 on e-bay. More if you can coax more than 40 mw out of it.

    For what it's worth, 40 mw is rather low for a multi-line argon. It might be that they run it at super-low current for long life, and the power you see is the guaranteed power at end of life. If that's the case, you might be able to crank it up to 8 amps and get 100 mw or more. (Most max out at 10 to 12 amps, and that really shortens the life, but a good tube will make 150 mw or better at 10 amps.)

    A healthy tube & PSU that maxes out at 150 mw + will fetch $450 to $500 on E-bay.

    Adam

  3. #3
    Join Date
    Jul 2008
    Location
    Marysville, WA
    Posts
    855

    Default

    the PSU and head in that sequencer should be a 2114-40MLA and a 2214-40MLA respectively

    Should do around 150mW, like buffo said

    AND, they are actually pretty good sources to get the lasers from, because the laser is usually ran at or very close to idle. 40mW at the max, which should only be around 6A tube current. SO, even if it has high hours on it (most usually dont), it's still probably in good shape. I've seen one of those that came out of the machine with te hour meter pegged, over 10k hours, and it still did 140mW @ 10.6A

  4. #4
    Join Date
    Aug 2008
    Location
    the hills
    Posts
    983

    Default

    Quote Originally Posted by GooeyGus View Post
    because the laser is usually ran at or very close to idle. 40mW at the max, which should only be around 6A tube current.
    Thanks guys.

    That is what I read, max operating in the unit is 40mw. I figured the tube would do much more.

    To those of you with experience with these machines, what other goodies are inside that may be sold to help offset the cost. I am finding that poor country boys should stick to moonshine likker and not expensive lasers for their hobby/addiction.

  5. #5
    Join Date
    Jan 2007
    Location
    Cupertino, California
    Posts
    2,130

    Default

    You'll probably have some mechanical parts which are valuable. Also they may be some sensor that could be valuable. Electronics wise, it may not have too much.
    CLICKY!!!

    Admin: In the immortal words of Captain Planet: YOU HAVE THE POWER
    Admin: (To quit being a bitch)

  6. #6
    Join Date
    Jul 2008
    Location
    Marysville, WA
    Posts
    855

    Default

    Quote Originally Posted by mophead View Post
    Thanks guys.

    That is what I read, max operating in the unit is 40mw. I figured the tube would do much more.

    To those of you with experience with these machines, what other goodies are inside that may be sold to help offset the cost. I am finding that poor country boys should stick to moonshine likker and not expensive lasers for their hobby/addiction.
    There are a TON of REALLY NICE optics inside. The scrap aluminum from the unit alone is worth over $50.

  7. #7

    Default

    That is probably exactly like the argon laser and power supply I got from a dna sequencer. It does way more than 40mW..more like 120+mW at 10 amps. You shouldn't run it that hot for long though, and you probably should upgrade the cooling if you go above 7 or 8 amps.

    My DNA squencer also had a 3KV 100mA programmable switching HV supply. I still have it, probably worth a little bit by itself.

  8. #8
    Join Date
    Nov 2007
    Location
    Michigan
    Posts
    97

    Default

    Here's a run down of the disassembly and the components.

    http://deviantphoton.com/gas-lasers/...laser-recovery
    The Frothy Chimp
    Cynic Extraordinaire
    Back off man, I'm a scientist

    Good whiskey, fine cigars, long legged women and blues guitar.
    That's what I like.

    The strong shall stand, the weak shall fall by the wayside.

  9. #9
    Join Date
    Jan 2007
    Location
    Cupertino, California
    Posts
    2,130

    Default

    Very nice break down! I would love to see what is in that detector system!
    CLICKY!!!

    Admin: In the immortal words of Captain Planet: YOU HAVE THE POWER
    Admin: (To quit being a bitch)

  10. #10
    Join Date
    Aug 2008
    Location
    the hills
    Posts
    983

    Default

    Thanks Frothy. Nice tek ya got there.

    If I can get this unit for 100 bucks less than already been quoted, i'll get it. If not, oh well. I'll give up the seller to someone else if that is the case.

    I have a promise here i must keep before i spend that $$$. I try my best to keep my word.

    Infact, better take care of that now.

    Thanks y'all.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •