How fast can Livequick with FB3 run scanners as I am looking in the setup and it looks like 30k is the fastest!?
Cheers
How fast can Livequick with FB3 run scanners as I am looking in the setup and it looks like 30k is the fastest!?
Cheers
double or tripple that
Eat Sleep Lase Repeat
Scanner speed is greatly dependent on the scanner themselves.
30K speeds will cover most of what you need for a LONG time, since most graphics are designed around that speed. With beams, you'll probably never notice the difference.
The advantage to going up a slight step in scanner speed (like 40K scanners) is that generally you could still tune for 30K, but be able to get that speed at a wider scan angle.
Once you reach a point that the graphics you need to display require high-speed scanners, you're talking about a very substantial investment in the scanners themselves, and will probably be beyond using the FB3 as your primary controller, as well!![]()
RR
Metrologic HeNe 3.3mw Modulated laser, 2 Radio Shack motors, and a broken mirror.
1979.
Sweet.....
Thanks Stuka, I was going to get FB3 and DT-40's, should I bother getting the 40k if FB3 can only do 30k?
I understnad that I can scan wider but is it worth the double price tag of should I get the DT25's with FB3?
Cheers
Personally, if the price difference is "doable", I would recommend going with the DT-40's, since their rated speed gives you some "tweak" margin to play with when you tune them. If you decide to go with the DT-25's, you'll still be getting some great scanners, and as I mentioned before, with beams you won't really notice the difference.
Keep in mind (as I recently had to be reminded) that none of the "affordable" scanners we hobbiests are likely to purchase will give you 100% flicker-free graphics - some animation frames, even though designed for 30k, are just too complicated for anything less than high-speed, mega-buck scanners (think Cambridge...) to recreate "flicker free". That said, any of the 25K (+) DT's, ScanPro's and some others (check reviews on this forum) will do a pretty good job of handling most graphics files, and should suit you for a long time. Besides, as you'll find out, you'll be your own worse critic, and once you start doing shows for family & friends, they'll hardly notice any "flicker", since most of them will be completely blown away by your shows!
I can't stress enough how important it could be to try to hook up with some of your fellow countrymen already involved in this craziness, and get some recommendations & guidance. Not only could that save you some money, but potentially a lot of frustration & construction delays as well.
Rob (Stanwax) is a major contributor on this forum, and I'm sure he would be glad to help!
In any case, good luck - and post pictures!!![]()
Last edited by Stuka; 08-08-2009 at 08:05.
RR
Metrologic HeNe 3.3mw Modulated laser, 2 Radio Shack motors, and a broken mirror.
1979.
Sweet.....
Actually even the 30k CTs still have flicker in the graphics; the 60k high speed scanners might not but my 30k do.![]()
Love, peace, and grease,
allthat... aka: aaron@pangolin