A few folks on here have "crossed over" and are making a little bit of money with their projectors, but I think you'll find most of the folks on here just enjoy spending a LOT of money on their hobbies with little hope of monetary return on investment!! 
On the other hand - if you ever make it to SELEM, FLEM, or some of the other regional Laser Enthusiasts Meets, you're likely to see some laser shows that will blow away what might be seen in most small clubs (there's alot to be said for closed venues and multiple synchronized RGB projectors operating at once!!)
Of course, these meets are a GREAT way to figure out how to accomplish your projector build before you spend a lot of money!
Also, a little clarification on terminology -
What you're thinking about building is generally referred to as a laser projector. Inside the projector are the scanners (also known as galvonometers), which are the motorized closed-loop computer controlled mirrors that aim the laser beam to create the displayed beams and graphics.
Of course, to go with all of that, you'll have scanner amps, scanner power supply, lasers with drivers and power supplies, shutter and related circuits, dichro filters, positioning mirrors, interlock circuitry, cooling fans, panel indicator lamps / LEDS's, key switch, remote kill switch, controller card, computer to control it, and all the cables to hook it all up...
Can get expensive and somewhat complicated quickly - but it sure is cool when it all works!!
Last edited by Stuka; 10-09-2009 at 05:55.
RR
Metrologic HeNe 3.3mw Modulated laser, 2 Radio Shack motors, and a broken mirror.
1979.
Sweet.....