Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: My new green baby

  1. #1
    Join Date
    May 2008
    Location
    Once it was called "Bel Paese" = ITALY
    Posts
    858

    Default My new green baby

    Hi all guys!

    Just few pics about my last purchase from Marc - CT Lasers
    Projector case is still under refurbishment.
    Dimensions are: 28x28x13 cm.
    Aluminium baseplate is 24x22cm and 5mm thickness.

    As soon as possible I 'll post pics about laser in action and about his story also.

    Scanners are DT40
    Look at pics for green specs....

    THANK YOU MARC!
    You are a great guy!

    All the best

    Steve
    Attached Images Attached Images
    my webpage
    http://stevemilani.jimdo.com
    Skype ID: stevemilani957

    my RGB analogue projectors:
    3.9 W (640/532/445) 30kpps
    2.6 W (655/532/450) 30kpps
    2.5 W (638/532/450) 30kpps
    0.7 W (test unit)(635/532/473) 18kpps

  2. #2
    Join Date
    May 2007
    Location
    Milwaukee WI
    Posts
    1,355

    Default

    Looks nice, however, you may want to either slide the glavos closer to the laser or move the power supply a bit. It looks like youre crushing the y-axis cable.

    Now lets see some beam shots!!!

  3. #3
    Join Date
    May 2008
    Location
    Once it was called "Bel Paese" = ITALY
    Posts
    858

    Default

    You are half right *mliptack*
    "Y" galvos signal cable SEEMS to be too much close to DT40 PSU...
    In truth I can assure you that wires are free to move. As I already wrote, this is only a "first attempt" configuration set. I'll surelly do better when the whole projector will be completed

    And now...
    Pics and a short movie (.wmv format), last pics shown unit when at CW.

    Sorry for low quality of both... I haven't any camera stand...

    I used the same old "fir tree" as projection screen. It is about 20 meters far from my window.
    Figures and animation has been played by Pango FB3 at default settings (20kpps scan speed).

    A great 1.3W green unit! It worth every Euros I spent.

    I have to thank once more Marc *gottaluvlasers* and Bridge for quality and reliability of Laser-Wave products.

    All the best
    Steve
    Attached Images Attached Images
    Attached Files Attached Files
    my webpage
    http://stevemilani.jimdo.com
    Skype ID: stevemilani957

    my RGB analogue projectors:
    3.9 W (640/532/445) 30kpps
    2.6 W (655/532/450) 30kpps
    2.5 W (638/532/450) 30kpps
    0.7 W (test unit)(635/532/473) 18kpps

  4. #4
    Join Date
    Jan 2007
    Location
    Peking
    Posts
    1,207

    Default

    I used the same old "fir tree" as projection screen. It is about 20 meters far from my window.
    Tree as Projection screen? how about you thought give us some surprise laser tree this year during Christmas? RGB tree or green tree?
    Best regards!
    Bridge
    Laser-wave can supply:
    Green 532nm, 4W, 10W, 15W
    blue 445nm, 2W, 3.5W, 6W, 10W
    blue 462nm, 2W
    Red 638nm, 500mW, 1W,2W, 4W, 5W, 6W, 8W, 10W
    All diodes, All optics, All mount, All laser base and housing for yourselves building lasers.
    Speical products, 532nm, OEM-V-SS, 4W, 98mm*46mm*48mm; OEM-H, 10W, 250mm*88mm*70mm
    www.laser-wave.com or www.laser-wave.net
    bridge@laser-wave.com or 463366312@qq.com
    We Chat: 463366312, Laserwave-Bridge

  5. #5
    Join Date
    May 2008
    Location
    Once it was called "Bel Paese" = ITALY
    Posts
    858

    Default

    Nice idea you had Bridge.
    I'll do them both over Christmas.
    Last night I written a big green "halloween" over the fir tree and all kids around my house was saying "WOW!" when looking at the tree....

    Playing by two projectors, "WOW!" will be double... I hope

    Best Regards
    my webpage
    http://stevemilani.jimdo.com
    Skype ID: stevemilani957

    my RGB analogue projectors:
    3.9 W (640/532/445) 30kpps
    2.6 W (655/532/450) 30kpps
    2.5 W (638/532/450) 30kpps
    0.7 W (test unit)(635/532/473) 18kpps

  6. #6
    Join Date
    Jan 2007
    Location
    Peking
    Posts
    1,207

    Default

    Another thought,how about some UFO pictures? from one tree to another? then to lake,back to sky(Maybe in smog days), then dismiss, .
    Laser-wave can supply:
    Green 532nm, 4W, 10W, 15W
    blue 445nm, 2W, 3.5W, 6W, 10W
    blue 462nm, 2W
    Red 638nm, 500mW, 1W,2W, 4W, 5W, 6W, 8W, 10W
    All diodes, All optics, All mount, All laser base and housing for yourselves building lasers.
    Speical products, 532nm, OEM-V-SS, 4W, 98mm*46mm*48mm; OEM-H, 10W, 250mm*88mm*70mm
    www.laser-wave.com or www.laser-wave.net
    bridge@laser-wave.com or 463366312@qq.com
    We Chat: 463366312, Laserwave-Bridge

  7. #7
    Join Date
    Jan 2008
    Location
    Belgium
    Posts
    1,009

    Default

    Wow, looks like the DT40's were updated (and so were the drivers)

  8. #8
    Join Date
    Jul 2006
    Location
    Connecticut, USA
    Posts
    2,478

    Default

    Quote Originally Posted by FourDee View Post
    Wow, looks like the DT40's were updated (and so were the drivers)
    i can vouch for that! i have gotten i think 5 sets of the DT40s already from DZ. they are an excellent scanner system!! perfectly tuned. quiet as hell. and mirror reflectivity is excellent. worth every penny!

    Steve-

    Laser looks EXCELLENT!! Congrats man! nice and small enclosure also. my one and only suggestion, and this is just my opinion---

    i always like to have a bounce mirror to shoot the beam into the scanners. after time and when metal heats and cools. heats and cools. things tend to shift, and may become mis-aligned. with no adjustment points from your laser into the scanners, you will be forced to loosen your head and/or your scanners and re-alignement beomes a pain in the ass!

    with an adjustable mirror/mount, tweak a thumb screw and youre re-aligned. especially with 1+ Watts of green, the extra 2mW loss off of a mirrors is nothing!

    just my opinion.

    still an excellent job! the projection onto the trees looks great!

    -Marc
    http://www.laserist.org/images/ildalogos/ILDA-logo_colored-beams_Corporate_150w.jpg

    ILDA- U.S. Laser Regulatory Committee

    Authorized Dealer for:

    • Pangolin Laser Software and Hardware
    • KVANT Laser Modules & Laser Systems
    • X-Laser USA
    • CNI Lasers
    • Cambridge Technology & Eye Magic Professional Scanning Systems

    FDA/CDRH Certified Professional LuminanceRGB Laser Light Show Systems


  9. #9
    Join Date
    May 2008
    Location
    Once it was called "Bel Paese" = ITALY
    Posts
    858

    Smile

    Thanks for appreciate my hasty job Marc

    To be sincere I thought to put a bounce mirror me too...
    But I would have had to change the dimensions of the alu baseplate and of whole case also.

    Anyway I applied a trick to lock on DT40 galvos mount...
    Needed diameter of screws is 4mm: instead I made 5.75 mm holes. Doing so, screws are smaller than holes and I easily obtained +/-1.75mm of "movement range" of galvos block for all future allignments
    I already used this kind of "trick" for all my other projectors and it seems to work fine up now.

    About pics I posted...
    I know their quality is a real s**t... ...Figures and words projected on the fir tree seem truely to be "trembling like a pudding" ...but I can give you the top insurance about quality of all figures coming out from DT40 I had (thanking once more Marc): scanners are really well tuned... five stars rated!

    I hope to post some nice photos a.s.a.p.

    Greetings!

    All the best
    Steve
    my webpage
    http://stevemilani.jimdo.com
    Skype ID: stevemilani957

    my RGB analogue projectors:
    3.9 W (640/532/445) 30kpps
    2.6 W (655/532/450) 30kpps
    2.5 W (638/532/450) 30kpps
    0.7 W (test unit)(635/532/473) 18kpps

  10. #10
    Join Date
    Nov 2005
    Location
    Melbourne, Australia
    Posts
    3,702

    Default

    Quote Originally Posted by FourDee View Post
    Wow, looks like the DT40's were updated (and so were the drivers)
    Nah, they are scanpro40's by the look of the scanners and driver boards
    KVANT Australian projector sales
    https://www.facebook.com/kvantaus/

    Lasershowparts- Laser Parts at great prices
    https://www.facebook.com/lasershowparts/

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •