Hey Guys.
Got a nice ALC60x projector from Jim ( smogthemog ) the other day and it was working fine, 120mW 6 lines. Decided to open it up and add the colour card, found out that a filter cap had blown itself off, so I fixed that. Put it all back together and got it up and running, was working fine then it just winked out. Figured it was a temperature interlock, but it doesn't seem that it is. The head will still try to start and lase on the starting pulse but the tube won't light.
I tested the voltage across the anode - cathode and it read 0V, or around 89V when it tried to start ( My DMM isn't fast enough to read the starting pulse ).
Any ideas what could be wrong? I figured that it's a transistor or a relay that's packed in, but I'm not certain.
Any help would be great, some pictures to come soon.
Cheers!
EDIT WITH PICTURES:
Anode and Cathode labelled on the PSU.
Caps shown before and after repair :
BEFORE
AFTER
Beam shot from when it was working, green and blue lines split using dichros.
![]()


. Decided to open it up and add the colour card, found out that a filter cap had blown itself off, so I fixed that. Put it all back together and got it up and running, was working fine then it just winked out. Figured it was a temperature interlock, but it doesn't seem that it is. The head will still try to start and lase on the starting pulse but the tube won't light.




Reply With Quote
It just keeps firing though, lases on every pulse.




