Page 1 of 3 123 LastLast
Results 1 to 10 of 21

Thread: FAP800 Threashold ?

  1. #1
    Join Date
    Mar 2007
    Location
    North Iowa
    Posts
    249

    Default FAP800 Threashold ?

    I got an FAP800 12W 806 module. It has the fiber output coupler.

    At 3 Amps drive, I read 17 mW output. Tonight, I coupled two power supplies and increased each up carefully to 6 Amps. --- 55 mW :-(
    Is 6 amps still below threshold for a 12 W module? Google doesn't show a Part number 1064116.

    Mike

  2. #2
    Join Date
    Jun 2007
    Location
    Lake Geneva, WI.
    Posts
    2,704

    Default

    Sounds like it's toast to me... You should be above threshold @ 6A.

  3. #3
    Join Date
    Mar 2007
    Location
    North Iowa
    Posts
    249

    Default

    Thank You --- Mike

  4. #4
    Join Date
    Jun 2007
    Location
    Lake Geneva, WI.
    Posts
    2,704

    Default

    Ebay?

    If so, who for the track record and can you return it?

  5. #5
    Join Date
    Mar 2007
    Location
    North Iowa
    Posts
    249

    Default

    I purchased this from electronicswest@hotmail.com for $41. He seems to be selling a bunch of these modules "untested".
    I have sent an email asking for a trade on this explaning my test results.
    It arrived without a shorting bar but in an antistatic bag well packaged.

    Mike

  6. #6
    Join Date
    Mar 2007
    Location
    North Iowa
    Posts
    249

    Default

    The seller has responded to my email and will send a replacement unit
    on Monday -- No problem !!! I hope the next one works.

    Mike

    The seller is sending now a 25 Watt replacement module --- Stay tuned!
    Last edited by Hemlock Mike; 11-16-2009 at 17:23.

  7. #7
    Join Date
    Mar 2007
    Location
    North Iowa
    Posts
    249

    Default

    This seller has contacted me and is sending a "replacement" 25 Watt module. I hope it works. I only ordered the 12 watt unit but a 25 is OK with me......

    Mike

  8. #8
    Join Date
    Jun 2007
    Location
    Lake Geneva, WI.
    Posts
    2,704

    Default

    Sweet! Hope the next one works out better. What kinda PS do you have for diving that sucker?

  9. #9
    Join Date
    Mar 2007
    Location
    North Iowa
    Posts
    249

    Default

    For initial testing, I'm using a pair of 3 Amp regulated supplies. After that, I will use a 3.3volt computer PS with current limiting.
    Is there a schematic around for using a Mosfet follower for constant current? High side regulation will be OK too. THe happy days of the LM317 are slipping past us!

    Mike

  10. #10
    mixedgas's Avatar
    mixedgas is offline Creaky Old Award Winning Bastard Technologist
    Infinitus Excellentia Ion Laser Dominatus
    Join Date
    May 2007
    Location
    A lab with some dripping water on the floor.
    Posts
    10,114

    Default

    respectfully, I'd consider shunting the diode with a switch or relay until you get a good supply, thus making sure start/stop surges dont pop your new baby, but watch for spikes from the relay coil, ie the relay is on a different supply with reverse diodes across it.

    Steve
    Qui habet Christos, habet Vitam!
    I should have rented the space under my name for advertising.
    When I still could have...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •