I want to be buried in that .
" MANUFACTURER OF HIGH QUALITY MICRO LASER COMPONENTS" !!
http://www.microlaserlabs.com/
Well.... ? did you founf that pic in google.com or are there pics comming and video's ?
Any day you receive a new laser that needs a plywood crate is a good day...
Holy mother of God, 2.25mm, <0.5mrad full angle, 18 watts, noiseless beam... Nice thing is you will be able to do atom cooling or trapping with that thingIt will not be really reasonnable to use this laser for any other uses, not?
![]()
OK, the laser's all set up and working wonderfully. The pic below shows it in the top right corner, feeding a set up to make a hologram grating with the new Bayer material.
Verdi V-6 Set-up.jpg
Here's a shot showing a shutter and an attenuator in front of the head, before a periscope. I use an attenuator to set the power level where I want it for exposure, while keeping the laser operating at full current to keep it stable and coherent. this Verdi outputs 6W.
Verdi V-6.jpg
And here's a pic showing the chiller that came with it. Cute little chiller that cools a mounting block under the laser head.
Verdi V-6 Chiller.jpg